4OM-1429-008_w.pdf - 第47页

Safety Precautions Safe-36 ALFE-ID No. Alert Labels and Description (30) Be sure to fully insert the filter holder until it stops. Description l Unless the lter holder is set correctly in place, a pickup error will occu…

100%1 / 279
Safety Precautions
Safe-35
ALFE-ID
No. Alert Labels and Description
(27)
Description
l
For transportation, the arms of a fork lift truck or a catch pallet must be
inserted from the front or rear side of the machine.
If the arms or the catch pallet is inserted from the side f
ace of the machine,
the electrically equipped sections may be damaged.
(28)
Description
l
Do not put any feeder sideways nor tools on the feeder bases. Otherwise, the
machine will break down.
(29)
Applying a large force will deform the backup table.
Do not put your hand on the backup table.
Description
l
If you put your hand or a heavy object on the backup table while working
inside the machine, the backup table may become deformed due to an
excessive load.
0805-003
Safety Precautions
Safe-36
ALFE-ID
No. Alert Labels and Description
(30)
Be sure to fully insert the filter holder
until it stops.
Description
l
Unless the lter holder is set correctly in place, a pickup error will occur or
the lter will come off and cause an interference with a head. The head may
also be damaged.
(31)
Do not connect
it incorrectly .
This should only be connected to
the connector with a blue circle mark.
Do not connect it to any other connector.
Description
l
Do not connect any connector other than the specied one. Otherwise, the
machine may break down.
(32)
Do not connect it
to any other system.
The connector with
a blue circle mark.
Description
l
Do not connect the connector with another machine. Otherwise, the machine
may break down.
0805-003
Safety Precautions
Safe-37
ALFE-ID
5. Precautionary Items for Correct Operations
Requirements for Installation
Be sure to fulll the following requirements for safety purposes.
•
Overvoltage Category : Category
III
•
Pollution Degree
: 3
l
Overvoltage Categories refer to the level of Impulse Withstand Voltage protection
provided at the specied Pollution Degree.
Category I
I
I
:
Primary circuits of a device to which power is directly
supplied from the power distribution panel, and circuits from
the distribution panel to outlets.
Note
The term was changed from "Installation Category" to "Overvoltage
Category".
l
"Pollution Degree" is a degree of pollution severity.
Pollution Degree 3: Conductive pollution or dry nonconductive pollution
that becomes conductive due to condensation occurs.
To be found in industrial environment or construction
sites (harsh environments).
0805-003