4OM-1429-008_w.pdf - 第82页
1-23 0712-002 3.3.3 Component Recognition Camera Section Notice Be sure to use a suction force such as a vacuum cleaner for the cleaning. Do not blow air to any cleaning section with an air gun. Component Recognition Cam…
1-220707-001
Filter Case
C
Setscrews
Setscrews
Filter
Every 3 Months Cleaning
(1) Remove four setscrews fastening the cover located at the lower area
of the front side of the machine and detach the cover.
(2) Rotate the filter case in A
rrow Direction C to detach and then take out
the filter.
(3) Blow air to the filter for c
leaning.
When the vacuum pressure has dropped during the operation, replace
the filter with a new one.
(4) Attach the cover and tighten the setscrews.
If a clearance is left between the main machine and the cover,
the tape will pop out from the clearance during the operation,
causing the machine to breakdown or generate an error.
Required Time: 10 minutes
Notice
Fig. 4A13
3.3 Inspection, Cleaning, and Lubrication Spots
1-230712-002
3.3.3 Component Recognition Camera Section
Notice
Be sure to use a suction force such as a vacuum cleaner for the
cleaning.
Do not blow air to any cleaning section with an air gun.
Component Recognition Camera
Every Day Cleaning
Required Time: 4 minutes
Remove the com
ponents that have fallen
with a pair of vacuum tweezers and wipe
off dust with a lens cleaning cloth.
Hood
(for BGA components)
Fig. 4A14
CAUTION
Be sure to wear gloves during cleaning. Otherwise, you may cut
your hands on the edges of the lighting hood.
Note
G-S047-01 Adhesive Cleaner (Part No: 630 133 0679) is also available as
an option.
Adhesive Cleaner
Fig. 4A14-1
3.3 Inspection, Cleaning, and Lubrication Spots
1-24
CAUTION
Before removing the accumulated components from the box, be
sure to connect a grounding cable (used to make a connection to
ground) to your body.
Otherwise, some component may be damaged by static electricity.
Hanenaito (Vibration Proof Rubber)
Every Day Cleaning
Required Time: 1 minute
Take out Hanenaito from the component
storage box and clean it with a vacuum
cleaner.
Component Storage Box
Every Day Cleaning
Required Time: 1 minute
Remove components collected in the box.
Fig. 4A15
3.3 Inspection, Cleaning, and Lubrication Spots
0707-001