4OM-1429-008_w.pdf - 第172页
3-1 1 0707-001 3.2 Data 3.2 Data T able 4C4 Erroe ID Error Name, Description, Cause, and Remedy 410101 Data Error Machine data and system data error detected. ----- 410102 Data Error Auto run start mode setup data error …
3-100712-002
3. Error IDs and Remedial Procedures
Erroe ID Error Name, Description, Cause, and Remedy
400c02 Nozzle stocker down time out
Nozzle stock unit lower bound detection 2 was not turned on in prescribed time.
Please confirm the lower bound detection 2 sensor of nozzle stock unit.
400c03 Nozzle stocker down time out
Nozzle stock unit lower bound detection 3 was not turned on in prescribed time.
Please confirm the lower bound detection 3 sensor of nozzle stock unit.
400c04 Nozzle stocker down time out
Nozzle stock unit lower bound detection 4 was not turned on in prescribed time.
Please confirm the lower bound detection 4 sensor of nozzle stock unit.
400d01 Software Interlock Error
Head (rear) NL axis's poor operation was detected, and the scram of the XY axis
was carried out.
Please perform a zeroing.
400d02 Software Interlock Error
Head (rear) NL axis's poor operation was detected, and the scram of the XY axis
was carried out.
Please perform a zeroing.
3-110707-001
3.2 Data
3.2 Data
Table 4C4
Erroe ID Error Name, Description, Cause, and Remedy
410101 Data Error
Machine data and system data error detected.
-----
410102 Data Error
Auto run start mode setup data error
-----
410103 Data Error
Steps in converted pattern program is more
-----
410104 Data Error
Pattern Program Errors(P
.E.C.Recog step error)
-----
410105 Data Error
The component library data used by the pattern program data doesn't exist.
-----
410106 Data Error
The nozzle type data registered in the nozzle data doesn't exist
-----
410107 Data Error
The nozzle type data registered in the nozzle data doesn't exist
-----
410201 Mode data Error
Abnormality is found in the production driving beginning mode setting data.
-----
410301 Pattern Program Error
Steps in converted pattern program is more
-----
410302 Pattern Program Error
There are Errors in converted pattern program(P
.E..C. recog steps Error.)
-----
410303 Pattern Program Error
The converted pattern program is not exist, the data is damaged.
-----
410304 Pattern Program Error
The error is found in the adsorption nozzle number of the conversion pattern
program.
-----
410305 Pattern Program Error
The error is found in the order of adsorption of the conversion system pattern
program.
-----
3-120707-001
3.2 Data
Erroe ID Error Name, Description, Cause, and Remedy
410306 Pattern Program Error
The error is found in the nozzle candidate number of the conversion pattern
program.
-----
410307 Pattern Program Error
The error is found in the adsorption lane number of the conversion pattern
program.
-----
410308 Pattern Program Error
The error is found in the alternation lane number of the comp arrangement data of
the conversion pattern program.
-----
410309 Pattern Program Error
The conversion of the pattern program did not end in prescribed time.
-----
410401 Component Library Data Error
The part library data used by the converted pattern program doesn't exist.
-----
410402 Component Library Data Error
The use nozzle candidate was not able to exchange nozzles because of the skip
specification.
-----
410501 Nozzle Data Error
The error is found in the head nozzle data of the device system data.
-----
410502 Nozzle Data Error
The error is found in the stocker nozzle data of the device system data.
-----
410601 Data Error
-----
410602 Data Error
Error is found in the
AUTO OPN MODE beginning mode setting data.
-----
410701 Program Error
It was a error setting of the sequence data was found.
-----
410702 Program Error
It was a error setting of the polling task was found.
-----