4OM-1429-008_w.pdf - 第22页

Safety Precautions Safe-1 1 ALFE-ID Alert Indications described as " " (continued) Alert Description Related Items Pay close attention to the cutter blade during the maintenance work. • Lack of attention will r…

100%1 / 279
Safety Precautions
Safe-10
ALFE-ID
0707-001
Alert Indications described as " WARNING "
Alert Description Related Items
Be sure to keep the all covers (door type) closed to avoid any
danger when the automatic operation is started or during the
automatic operation.
"2.2.3" in
"Chapter 1 (Vol. 1)"
Before performing maintenance work, shut off the power breaker
and lock the power breaker with the padlock.
"2.3.1" in
"Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to work
inside the machine.
This machine uses strong permanent magnets in the moving
areas of the X/Y beams.
The pacemaker may be affected by the magnetism and a serious
accident will result.
"2.4.4" in
"Chapter 1 (Vol. 1)"
If the bank feeder change cart is not set, a clearance will be left
at the feeder setting area and the operator will be exposed to
danger.
Be sure to use the machine with the bank feeder change cart
being connected.
"2.4.8" in
"Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to
handle the tape feeders.
The pacemaker may be affected by the magnetism and a serious
accident will result.
"1.2.2" in
"Chapter 2 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Only a well-trained service person should perform maintenance
work
carefullyforthemachineincompliancewiththespecied
instructions.
"1.1" in
"C
hapter 1 (Vol. 4)"
Before maintenance work, shut off the power breaker and lock it
with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
"1.1" in
"Chapter 1 (Vol. 4)"
WARNING
Safety Precautions
Safe-11
ALFE-ID
Alert Indications described as " " (continued)
Alert Description Related Items
Pay close attention to the cutter blade during the maintenance
work.
•
Lack of attention will result in a hand injury
, etc.
Wear gloves and take the greatest care in performing the work.
•
Besuretoattachthexingjigtothe
cutunitduringthe
maintenance work for safety purposes.
"3.3.6", "4.3" and
"4.4" in "Chapter 1
(Vol. 4)"
0712-002
WARNING
Safety Precautions
Safe-12
ALFE-ID
Alert Indications described as " CAUTION "
Alert Description Related Items
Avoidhandandngerinjuries.
•
Be careful to avoid hand and nger injuries when closing the covers
(door type).
•
Hold the handgrip rmly and open or close the cover (door type)
slowly.
"2.2.3" in
"Chapter 1 (Vol. 1)"
When the green lamp of the light tower is ON or ickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.3.2" in
"Chapter 1 (Vol. 1)"
Before
performinganywork,conrmthatthe"LOCK"lampon
the operation panel is "ON" (green).
•
If
the"LOCK"lampisnotturnedon,themachine
can
be operated at any time from both front and rear sides,
endangering the operators around the machine.
•
Before performing any setup work, etc., with the machine
powered, be sure to press the [PNL CHANGE] button on either
thefrontortherearoperationp
anelandconrmthatthe[LOCK]
lamp is turned "ON".
"2.3.4" in
"Chapter 1 (Vol. 1)"
Before operating the machine, conrm that there are no people around
the machine (GXH-3) (especially, the other side of the machine
operation) and no objects such as tools and parts are left around the
machine.
"2.4.2" and
"2.4.2.1" in
"Chapter 1 (Vol. 1)"
When a PCB is trapped in the PCB receiving area between the
main machine and the input or the output machine, be sure to
stop the machine before removing the PCB.
Depending on how the output systems are specied for the input and
output machines, the related conveyor may start running in the Y
direction for PCB Y-position arrangement at the moment when the
trapped PCB is removed, causing your nger(s) to get caught in the
conveyor.
"2.4.2" in
"Chapter 1 (Vol. 1)"
0707-001
CAUTION