4OM-1429-008_w.pdf - 第42页
Safety Precautions Safe-31 ALFE-ID No. Alert Labels and Description (16-1) CAUTION Burn Hazard by Lamp Before lamp replacement, be sure to turn off the power and wait until the lamp cools down. Otherwise, a burn will res…
Safety Precautions
Safe-30
ALFE-ID
No. Alert Labels and Description
(14)
Description
l
The grounding line (PE) must be connected rst to the leading-in section of the
primary power supply.
Imperfect grounding will cause an electric shock.
(15)
(15-1)
(15-2)
(15-3)
Description
l
This label indicates that high voltage is applied to the area.
Residual voltages may remain behind for a few minutes
in the internal devices of
the machine after power interception.
Before performing maintenance work, wait until the char
ge lamps of the DC power
supply and the servoamplier go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
0805-003
Safety Precautions
Safe-31
ALFE-ID
No. Alert Labels and Description
(16-1)
CAUTION
Burn Hazard by Lamp
Before lamp replacement, be sure to turn
off the power and wait until the lamp
cools down. Otherwise, a burn will result.
Description
l
The inside of the recognition light source unit becomes high in temperature.
Before replacing the lamp with a new one, set the power breaker to "OFF" and
leave the unit intact until it cools down sufciently.
(16-2)
Description
l
Do not open the cover of the light source device while the machine is running.
The cover, when opened, exposes users to the high voltage components and may
result in electrical shocks.
(17)
CAUTION
PCB Transfer Conveyor Section
Pay attention to the chute.
Do not put your hand in inside the machine during
operation.
The chute might be moved and an injury be resulted.
Description
l
Do not put your hand inside the machine while the machine is running. Otherwise,
your hand may be trapped in the moving mechanisms, causing injury.
0805-003
Safety Precautions
Safe-32
ALFE-ID
No. Alert Labels and Description
(18)
CAUTION
When the feeder base is moved up and down and
you finger is put into the moving section,
you might get injured.
Do not put your hand into the moving section.
Your hand or finger might be crushed.
Description
l
Do not put your hand in the moving area while the feeder base is moving up or
down.
While the LED of a [FEEDER READY] switch is ickering, it indicates that the
feeder base is moving upward or downward.
(19)
CAUTIONCAUTION
Do not touch it with bare hand.
Your hand might be cut at the hood edge.
Wear gloves when cleaning.
Description
l
Be sure to wear gloves during cleaning. Otherwise, you may cut your hands on the
edges of the lighting hood.
(20)
Description
l
Before operating the machine, please read the instruction manual carefully for
correct operations.
An operator
’s error will break down the machine, causing an injury or a serious
accident.
0805-003