4OM-1429-008_w.pdf - 第214页

3-53 3.9 Others 0712-002 Erroe ID Error Name, Description, Cause, and Remedy 4b2105 SSC network abnormal There is a problem with the connection between the position board MR- MC10-U83 channel 2 and ampliﬁer . (1) Shut do…

3-52

3.9 Others

0712-002

Erroe ID Error Name, Description, Cause, and Remedy

4b2009 P.C.B Height Measurement

Detected a curve more than permission values. (- direction)

-----

4b200a P.C.B Height Measurement

Error of the result measured by a master jig (height)

Check if the master jig (height) has some dirt and foreign particles.

4b200b P.C.B Height Measurement

Failed in wearing height revision.

-----

4b2011 P.C.B Height Measurement

Measurement time-out

-----

4b2081 P.C.B Height Measurement

Abnormality occurred for communication with a sensor

-----

4b2082 P.C.B Height Measurement

Failed in wearing height revision.

-----

4b2083 P.C.B Height Measurement

Measurement time-out

-----

4b2101 SSC network abnormal

There is abnormal in SSC network.

Please conﬁrm the cable of SSC network.

4b2102 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U82 channel 1and ampliﬁer.

(1)

Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁ

er is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2103 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U82 channel 2and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁ

er is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2104

SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U83 channel 1and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3)

Check whether or not the servo ampliﬁers are damaged.

3-53

3.9 Others

0712-002

Erroe ID Error Name, Description, Cause, and Remedy

4b2105 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U83 channel 2 and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2106 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U84 channel 1 and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3)

Check whether or not the servo ampliﬁers are damaged.

4b2107 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U84 channel 2 and ampliﬁ

er.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3)

Check whether or not the servo ampliﬁers are damaged.

4b2108 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U90 channel 1 and ampliﬁ

er.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3)

Check whether or not the servo ampliﬁers are damaged.

4b2109 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U90 channel 2 and ampliﬁ

er.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3)

Check whether or not the servo ampliﬁers are damaged.

4b2201 Illegal Operation

There is no Pattern program ﬁle.

-----

4b2301

Feeder (Servo Error)

Alarm Code:A0 - Internal Parameter Error (Breakdown of Control P.C.B.)

Please replace the feeder. (Do not disconnect the feeder in powering on,

otherwise it may cause the inside data broken.)

3-54

3.9 Others

0712-002

Erroe ID Error Name, Description, Cause, and Remedy

4b2302 Feeder (Servo Error)

Alarm Code:A1 - Ov

er Current Error (Foreign substances in the tape feeding drive

section)

Conﬁrm whether or not the tape is being jammed on the path./ Conﬁrm the reel to

operate smoothly./ Conﬁrm whether or not some components and dust are being

caught in the sprocket./ Conﬁrm whether or not some components and dust are

being caught in the tape feeding gear.

4b2303 Feeder (Servo Error)

Alarm Code:A2 - Others

-----

4b2304 Feeder (Servo Error)

Alarm Code:A3 - Others

-----

4b2305 Feeder (Servo Error)

Alarm Code:A4 - Ma

in Circuit Power Supply Error (Please check the power supply

voltage.) (G04)

Please check the power supply voltage.

4b2306 Feeder (Servo Error)

Alarm Code:A5 - Fault Speed Error (Tape catching)

Conﬁrm whether or not the tape is being jammed on the path./ Conﬁrm the reel to

operate smoothly./ Conﬁrm whether or not some components and dust are being

caught in the sprocket./ Conﬁrm whether or not some components and dust are

being caught in the tape feeding gear.

4b2307 Feeder (Servo Error)

Alarm Code:A6 - Others

-----

4b2308 Feeder (Servo Error)

Alarm Code:A7 - Fault Load Error (Tape twisting, Catching foreign substances)

Conﬁrm whether or not the tape is being jammed on the path./ Conﬁrm the reel to

operate smoothly./ Conﬁrm whether or not some components and dust are being

caught in the sprocket./ Conﬁrm whether or not some components and dust are

being caught in the tape feeding gear.

4b2309 Feeder (Servo Error)

Alarm Code:A8 - Encoder Error (Breaking wire, Breakdown of control P.C.B. and

Defective servo motor)

Please replace the feeder.

4b230a Feeder (Servo Error)

Alarm Code:Ab - System Error

Please replace the feeder

. (It may be caused by trouble of the control P.C.B..)

4b230b Feeder (Servo Error)

Alarm Code:Ac - Reckless Run Detection Error

Please replace the feeder. (It may be caused by trouble of the control P.C.B..)