KE-750_MAINTE.pdf - 第180页

- 39 - (3) Others No. Description 1 Nozzle information *NOTE 14: X = 0 – 9 X = 10 – 29 X = 30 – 49 X = 50 – 59 X = 60 – 79 X = 80 – 99 C_NOZZLE100 – C_NOZZLE109 C_NOZZLE110 – C_NOZZLE129 C_NOZZLE130 – C_NOZZLE149 C_NOZZL…

100%1 / 228
- 38 -
(2) XY axes
No. Description
1 For XY axes PTP operation (High speed) (Medium speed) (Low speed)
2
3
*NOTE 10:
*NOTE 11:
*NOTE 12:
X = 0
X = 1
X = 2
X = 3
X = 4
X = 5
X = 6
X = 7
X = 8
X = 9
Y = 0
Y = 1
Y = 2
Y = 3
Y = 4
Y = 5
Y = 6
Y = 7
Y = 8
Y = 9
Y = 10
Y = 11
Z = 0
Z = 1
Z = 2
Z = 3
Z = 4
Z = 5
Z = 6
Z = 7
Z = 8
Z = 9
0mm < S <= 1mm
1mm < S <= 2mm
2mm < S <= 4mm
4mm < S <= 10mm
10mm < S <= 40mm
40mm < S <= 80mm
80mm < S <= 120mm
120mm < S <= 160mm
160mm < S <=
Reserved
TYPE 0 (For details of TYPE 0 to TYPE 9, see Table 4.)
TYPE 1
TYPE 2
TYPE 3
TYPE 4
TYPE 5
TYPE 6
TYPE 7
TYPE 8
TYPE 9
When without parts
When cover is open
Moves to mark position.
Moves to VCS position.
Moves to ATC position.
Moves to apply position.
Moves to MTC position.
Moves to verify position.
For coplanarity scanning movement
Reserved
Moves to the position where damping duration can be ignored.
When cover is open
4 Operation of XY axes other than PTP
*NOTE 13: X = 0
X = 1
X = 2
X = 3
X = 4
X = 5
X = 6
X = 7
X = 8
X = 9
X = 10
X = 11 – 14
Not used
JOG start operation (High speed)
JOG start operation (Low speed)
JOG stop operation
STEP operation
JOG start (- direction) when origin return
JOG stop (- direction) when origin return
JOG start (+ direction) when origin return
JOG stop (+ direction) when origin return
STEP operation when origin return
PTP operation when L.L.L execution
Reserved
- 39 -
(3) Others
No. Description
1 Nozzle information
*NOTE 14: X = 0 – 9
X = 10 – 29
X = 30 – 49
X = 50 – 59
X = 60 – 79
X = 80 – 99
C_NOZZLE100 – C_NOZZLE109
C_NOZZLE110 – C_NOZZLE129
C_NOZZLE130 – C_NOZZLE149
C_NOZZLE200 – C_NOZZLE209
C_NOZZLE210 – C_NOZZLE229
C_NOZZLE230 – C_NOZZLE249
Standard nozzle for laser centering
Semi-standard nozzle for laser centering
User dependent nozzle for laser centering (Special order)
Standard nozzle for vision centering
Semi-standard nozzle for vision centering
User dependent nozzle for vision centering (Special order)
4 Others
*NOTE 15: X = 0 – 11 Not used
6 Vacuum waiting time (ms) per part type
7 *NOTE 16: X = 0
X = 1
X = 2
X = 3
X = 4
X = 5
X = 6
X = 7
X = 8
X = 9
X = 10
X = 11
X = 12
X = 13
X = 14
X = 15
X = 16
X = 17
X = 18
X = 19
X = 20
X = 21
X = 22
X = 23
X = 24
X = 25
X = 26
X = 27
X = 28 – 48
X = 49
C_CHIP1
C_CHIP2
C_CHIP3
C_CHIP4
C_CHIP5
C_SOT
C_SOJ
C_GaAsFET
C_CHIP_OTHER
C_SOP
C_QFP
C_PLCC
C_TSOP
C_TSOP2
C_BQFP
C_BGA
C_CBGA
C_IC_OTHER
C_CONN
C_CONN_OTHER
C_SKT_J
C_SKT_G
C_SKT_B
C_SKT_OTHER
C_TR_UL
C_TR_UR
C_TR_LL
C_TR_LR
Reserve
C_OTHER
Square chip
Melf
Aluminum electrolytic capacitor
Network resistor
Trimmer
SOT
SOJ
CaAsFET
Other chip parts
SOP
QFP
PLCC (QFJ)
TSOP
TSOP 2
BQFP with bumper QFP
BGA (PBGA)
CBGA
Other IC chip
One-way lead connector
Other connector
J-lead socket
Gull-wing socket
Socket with bumper
Other IC socket
Transformer (Left top indent)
Transformer (Right top indent)
Transformer (Left bottom indent)
Transformer (Right bottom indent)
Other parts
10 Limit value of laser stain check
*NOTE 17: X = 0
X = 1
LAFM
LAHD
- 40 -
8. TYPE CLASSIFICATION OF PARTS
(TABLE 4: GX3 PART TYPE GROUPING)
Type Part type
TYPE0 Square chip parts, Melf, SOT, and other non-lead parts (except for 1005 chip mount
with #101 nozzle) for laser recognition, and to be mounted by #101, #102, or #103
nozzle.
TYPE1 1005 chip to be mounted with #101 nozzle.
TYPE2 Chip parts (tantalum capacitor, aluminum electrolytic capacitor, etc.), non-lead large
parts (except for BGA) for laser recognition, and to be mounted with #104, #105, or
#106 nozzle. Normally, mounted with #104 nozzle.
TYPE3 Lead parts for laser recognition, and to be mounted with #104 nozzle. This is also
applied to lead parts other than SOT to be mounted with #102 or #103 nozzle.
Normally,SOP8, SOP14/16 narrow type, and TSOP narrow type.
TYPE4 Lead parts for laser recognition, and to be mounted with #105 nozzle. PLCC and BGA
for laser recognition, and to be mounted with #106 nozzle. Normally, SOP14/16 wide
type, SOP 20/24/28 and TSOP wide type, SOJ, and PLCC.
TYPE5 QFP for laser recognition, and to be mounted with #106 nozzle. This is also applied to
QFP to be mounted with #104 or #105 nozzle.
TYPE6 Vision recognized parts to be mounted with #201, #202, or #203 nozzle. Normally,
SOP, TSOP, and SOJ.
TYPE7 Vision recognized parts to be mounted with #204 nozzle. Normally, QFP, PLCC
except for 18 pin type, and BGA.
TYPE8
TYPE9
Any parts other than above, and spare for those of custom specifications.