KE-750_MAINTE.pdf - 第74页

- 7 1 - (19) This chart shows that board B on the WAIT sensor which has been carried in from the I N buffer i s removed. B.A.IN Ready OUT I N sensor WAIT sensor (Virtual WAIT sensor) STOP sensor C.OUT sensor OUT sensor B…

100%1 / 228
- 70 -
(18)
This chart shows that board B on the WAIT sensor which
has been carried in from the IN buffer is removed.
This chart shows that board B once removed is returned on the
centering station which is not detected by the WAIT sensor.
B.A.IN
Ready OUT
IN sensor
WAIT sensor
(Virtual WAIT sensor)
STOP sensor
C.OUT sensor
OUT sensor
BU UP sensor
BU DN sensor
Stopper
Backup
External shape cramp 1
(X)
IN motor
CENT motor
OUT motor
Ready IN
B.A.OUT
Continuous
production
(Carriage start)
External shape cramp 2
(Y)
Manually remove.
Return.
Carriage, completed
[Key operation]
When the board carried in from the IN buffer is detected by the WAIT sensor, the
IN buffer is internally latched as "board loaded" condition. Therefore, in this
case, carriage is completed normally as board B is detected as expected after
board A is carried out.
However, if board size is large, or depending on the position where board B is
placed, the space between A and B is small, and this can be a cause of backup
error. The backup error in this case is regarded as normal as software, and this i
s
noted in the operation manual for the users.
- 71 -
(19)
This chart shows that board B on the WAIT sensor which
has been carried in from the IN buffer is removed.
B.A.IN
Ready OUT
IN sensor
WAIT sensor
(Virtual WAIT sensor)
STOP sensor
C.OUT sensor
OUT sensor
BU UP sensor
BU DN sensor
Stopper
Backup
External shape cramp
1 (X)
IN motor
CENT motor
OUT motor
Ready IN
B.A.OUT
Continuous
production
(Carriage start)
External shape cramp
2 (Y)
Manually remove.
10 s or more
CENT buffer error
[Key operation]
When the board carried in from the IN buffer is detected by the WAIT sensor, the IN
buffer is internally latched as "board loaded" condition. If board B is removed in this
condition, a timeout error occurs expecting board B to be carried in at the centering
station after board A is carried out.
- 72 -
(20)
This chart shows that production of
board B has been completed, waiting for
board A to be carried out.
[Key operation]
There is no latch operation of "board loaded" condition for the OUT buffer
though it is available with the IN buffer. Therefore, when the board on the
OUT sensor is moved out, the next board can be carried in, disregarding the
board carriage completion by turning the motor. Because the OUT sensor
can be installed in a wide range of position, it is noted in the operation manual
to adjust the sensor position for the board which has slits.
Manually remove.
B.A.IN
Ready OUT
IN sensor
WAIT sensor
STOP sensor
C.OUT sensor
OUT sensor
BU UP sensor
BU DN sensor
Stopper
Backup
External shape
cramp 1 (X)
IN motor
CENT motor
OUT motor
Ready IN
B.A.OUT
External shape
cramp 2 (Y)
Remove board A which is waiting
to be carried out by hand.