Vermes MDS 358X user Manual.pdf - 第184页
Attachments VTK - TR -BA- 072e - 1 - User Manua l MDS 358X S eries 173 14.7 Connection Di agram M DS 3580 This diagram shows the conn ections of an MD S 3580 . Fig. 81 : Connection Di agram MD S 35 80
Attachments
172
VTK-TR-BA-072e-1 - User Manual MDS 358X Series
RS-232C commands Functions
71
SCENARIO:READ:<scenario no.> Check the parameters of selected scenario
72
SETUP:ASAVE:<setup
no.>:<RI>,<OT>,<FA>,<NL>,<NP>,<DL>
Save parameters in a setup
73
SETUP:AREAD:<setup no.> Check the parameters of a setup
74
BAUDRATE:0/1/2/3/4 Change the baud rate
75
GETTD Check the current time
76
MDC:RESTART Restart the MDC
Attachments
VTK-TR-BA-072e-1 - User Manual MDS 358X Series
173
14.7 Connection Diagram MDS 3580
This diagram shows the connections of an MDS 3580.
Fig. 81: Connection Diagram MDS 3580
Attachments
174
VTK-TR-BA-072e-1 - User Manual MDS 358X Series
14.8 Declaration Concerning Decontamination of Shipped Equipment
Before returning Microdispensing Systems for purposes of inspection, maintenance and repair,
be sure that the equipment is in a completely decontaminated state. You have to fill out the
following form correctly; otherwise, the order will not be processed. Upon request, VERMES
Microdispensing performs the required decontamination after receipt of the corresponding
safety data sheet. This work will be calculated separately.
Only authorized and responsible personnel may fill out and sign this declaration!
1 Designation of the System
Serial No.:
MDV SN# _____________________________
MDV SN# _____________________________
2 Legally Binding Declaration
The signer declares that the microdispensing system is free of any substances harmful to health. The
decontaminated system is shipped according to legal prescriptions.
Company: _________________________________________________________________________
Address: __________________________________________________________________________
__________________________________________________________________________
Name: ____________________________________________________________________________
Phone: __________________________________
Fax:___________________________________
E-Mail: ____________________________________________________________________________
Date: ____________________________________
Signature: _____________________________
Company Stamp:
3 Note for Shipment
In order to prevent damage to the equipment, the manufacturer recommends using the original
packaging material for return. Instructions about transport have to be observed (see paragraph 12.1,
page 155). The manufacturer is not liable for any damage resulting from inadequate packaging or
transport.