Vermes MDS 358X user Manual.pdf - 第185页

Attachments 174 VTK - TR -BA- 072e - 1 - User Manua l MDS 358X S eries 14.8 Declaration Concer ning Decontami nation of Shipped Equi pment Before r eturn ing Micr odisp ensing S ystems f or purposes of ins pecti on, main…

Attachments

VTK-TR-BA-072e-1 - User Manual MDS 358X Series

173

14.7 Connection Diagram MDS 3580

This diagram shows the connections of an MDS 3580.

Fig. 81: Connection Diagram MDS 3580

Attachments

174

VTK-TR-BA-072e-1 - User Manual MDS 358X Series

14.8 Declaration Concerning Decontamination of Shipped Equipment

Before returning Microdispensing Systems for purposes of inspection, maintenance and repair,

be sure that the equipment is in a completely decontaminated state. You have to fill out the

following form correctly; otherwise, the order will not be processed. Upon request, VERMES

Microdispensing performs the required decontamination after receipt of the corresponding

safety data sheet. This work will be calculated separately.

Only authorized and responsible personnel may fill out and sign this declaration!

1 Designation of the System

Serial No.:

MDV SN# _____________________________

2 Legally Binding Declaration

The signer declares that the microdispensing system is free of any substances harmful to health. The

decontaminated system is shipped according to legal prescriptions.

Company: _________________________________________________________________________

Address: __________________________________________________________________________

__________________________________________________________________________

Name: ____________________________________________________________________________

Phone: __________________________________

Fax:___________________________________

E-Mail: ____________________________________________________________________________

Date: ____________________________________

Signature: _____________________________

Company Stamp:

3 Note for Shipment

In order to prevent damage to the equipment, the manufacturer recommends using the original

packaging material for return. Instructions about transport have to be observed (see paragraph 12.1,

page 155). The manufacturer is not liable for any damage resulting from inadequate packaging or

transport.

List of figures

VTK-TR-BA-072e-1 - User Manual MDS 358X Series

175

15 List of figures

Fig. 1: Front Side ........................................................................................ 21

Fig. 2: Back Side ......................................................................................... 23

Fig. 3: Connection for power supply 48 V DC – pin functions ................ 24

Fig. 4: Main menu ....................................................................................... 27

Fig. 5: Menu structure ................................................................................ 28

Fig. 6: Display main menu ......................................................................... 29

Fig. 7: Submenu „Pulse Parameters“ ....................................................... 29

Fig. 8: Message “Heater connected - press enter” .................................. 30

Fig. 9: Submenu “Cooler/Heater” ............................................................. 30

Fig. 10: Submenu “Cooler” .......................................................................... 31

Fig. 11: Submenu “Heater” ......................................................................... 32

Fig. 12: Before reaching the target temperature ...................................... 32

Fig. 13: The target temperature is reached ............................................... 32

Fig. 14: Submenu “Status” .......................................................................... 34

Fig. 15: Submenu “Scenario” ...................................................................... 35

Fig. 16: Submenu “Scenario-Def. 1” ........................................................... 36

Fig. 17: Submenu “Service-Option” ........................................................... 37

Fig. 18: Composition .................................................................................... 39

Fig. 19: Explosion view valve ...................................................................... 41

Fig. 20: Content ............................................................................................ 44

Fig. 21: Distance of the bores 45 mm ......................................................... 50

Fig. 22: Connecting the actuator cable – step 1 ......................................... 51

Fig. 23: Connecting the actuator cable – step 2 ......................................... 51

Fig. 24: Connector actuator cable - grip .................................................... 51

Fig. 25: Connecting the sensor cable – step 1 ............................................ 52

Fig. 26: Connecting the sensor cable – step 2 ............................................ 52

Fig. 27: Connector sensor cable - grip ....................................................... 53

Fig. 28: Switching Power Supply 48 V 4 A Push-Pull and its connector ... 53

Fig. 29: Heater MDH-48-BY ......................................................................... 54

Fig. 30: Heater cable 48 V ............................................................................ 54

Fig. 31: Flow Control Valve FCV-AC 6.0 M12 .............................................. 54

Fig. 32: Connection Cable for FCV-AC/HF M12 to MDC ............................. 55

Fig. 33: Connection diagram of MDS 358X ................................................ 55

Fig. 34: Valve with air cooling connected .................................................. 56

Fig. 35: Screwing tight the nozzle fixation nut .......................................... 57

Fig. 36: Adjust – Press [ADJ] ........................................................................ 58

Fig. 37: Message Adjust Screw OUT ............................................................ 58

Fig. 38: Screw open adjust screw ................................................................ 58

Fig. 39: Adjust – Press [ENTER] .................................................................... 58

Fig. 40: Message 500 Shots – Please Wait .................................................. 59