00197397-02_AI_Stationary_Camera_25_33_X-Serie-S_to_Gxxxx_DE_EN.pdf - 第108页
4 Appendix 4.4 Excerpts from the Service Manual 108 Assembly Instructions / Montageanleitung SIPLACE X-Series S Stationary Camera Type 25/33 Stationäre Kamera Typ 25/33 06/2016 4.4.2 Overview of Connections for BoxPC 627…
4 Appendix
4.4 Excerpts from the Service Manual
Assembly Instructions / Montageanleitung SIPLACE X-Series S Stationary Camera Type 25/33 Stationäre Kamera
Typ 25/33 06/2016
107
1 IC camera 2 FC camera
3 Camera bus cable IC/FC camera
[03077048-xx] location 2 to hotlink card
Cam 2 (X2) control computer
4 Camera bus cable IC/FC camera
[03077049-xx] location 3 to hotlink card
Cam 3 (X3) control computer
5 Hotlink card control computer 6 Cable IC/FC camera voltages [03076478-
W1] location 2 to subdistributor X7qa
7 Cable IC/FC camera voltages
[03076478-W2] location 3 to subdistrib-
utor X7qa
8 Subdistributor X7qa voltage stationary
camera
9 CAN bus X10cm sector 3 (only for direct
connection of IC camera)
10 CAN bus X10bm sector 2 (only for direct
connection of IC camera)
11 Cable extension camera bus IC/FC cam-
era [03055279-xx]. Only for IC and FC
camera at one location
12 Cable extension camera bus IC/FC cam-
era [03055279-xx]. Only for IC and FC
camera at one location
13 Cable: Extension power FC camera
[03055298-xx]. Only for IC and FC cam-
era at one location
14 Cable MCAN-Bus2.2 [03076505-xx] from
docking unit 2 X125So. Only for IC and
FC camera at location 2
15 Connector X125 CAN in on COT insert
[03076504-xx] from docking unit 2
X125So. Only for IC and FC camera at
location 2
16 CAN bus: IC and FC camera
[03050550-xx]. Only for IC and FC cam-
era at one location
17 Cable: MCAN-Bus2.3 [03076506-xx]
from docking unit 3 X135So. Only for IC
and FC camera at location 3
18 Connector X135 CAN in on COT insert
[03076504-xx] from docking unit 3
X135So. Only for IC and FC camera at
location 3
4.4 Excerpts from the Service Manual
The following chapters are excerpts from the service manual. For more information, refer to the full
service manual for your machine.
4.4.1 Installation Positions of COT Insert and Manual Table (Table Positions)
The following installation positions apply to the X
series S:
1. Installation position 1
COT insert: X4i S
2. Installation position 2
COT insert, manual table: X4i S
3. Installation position 3
COT insert, manual table: X2 S, X3 S, X4 S
4 Appendix
4.4 Excerpts from the Service Manual
108 Assembly Instructions / Montageanleitung SIPLACE X-Series S Stationary Camera Type 25/33 Stationäre Kamera
Typ 25/33 06/2016
4.4.2 Overview of Connections for BoxPC 627x/827x
4.4.3 Overview of Connections for BoxPC 427D