M20_Ope_E.pdf - 第359页

Chapter 11 Parameter Setting 11-13 ■ Head Nozzle Code It can be used at the NG result(E.g. when mist aking the absence of the nozzle for the presence, and vice verse. ) in recognition process for nozzle on head. Action: …

Chapter 11 Parameter Setting

11-12

11-1-9 Coplanarity Check (Optional)

Menu: System>UserParameter>Coplanarity Check

Check [Coplanarity Check] box to enable the coplanarity check function.

11-1-10 Nozzle

Menu: System>UserParameter>Nozzle

You can check the information and change the settings regarding nozzles when Nozzle

Presence Check or Nozzle ID Recognition can not be performed properly.

* The number of heads differs depending on the mounter model.

Chapter 11 Parameter Setting

11-13

■ Head Nozzle Code

It can be used at the NG result(E.g. when mistaking the absence of the nozzle for the presence,

and vice verse. ) in recognition process for nozzle on head.

Action:

① Check that the Head Nozzle Code corresponding to the machines is selected in the Head

Nozzle Code box as follows.

M10 → M10_NOH

M20 → M20_NOH

② Click the <Edit> button. The following window appears.

③ Select the Head No. in the Head box.

④ Click the <Image Test> button.

When Image Test Result is NG, check to see whether there is any dirt on the mirror and nozzle

ID mark sticker, or the condition of the illumination.

■ Station Nozzle Code

It can be used when the Nozzle No. can not be recognized or checking the presence of nozzles

in ANC is NG.

Action:

① Check that the Station Nozzle Code corresponding to the machines is selected in the

Station Nozzle Code box as follows.

M10 → M10_NOS

M20 → M20_NOS

Chapter 11 Parameter Setting

11-14

② Click the <Go> button. The following window appears.

③ Select the ANC No. in the Move the head to specified nozzle station box.

④ Click the <Execute> button.

⑤ “ Execute ? ANC:# “ message appears. Click the <OK> button to move the Teach Camera

above the specified ANC station.

⑥ Click the <Image Test> button.

When Image Test Result is NG, check to see whether there is any dirt on the mirror and nozzle

ID mark sticker, or the condition of the illumination.

■ Fixed Nozzle Info.

When a nozzle is fixed on a head, this nozzle is called Fixed nozzle and it can be set here.

Fixed nozzle can not be changed in ANC.

Action:

① Place the fixed nozzle on a specified head.

② Enter the Nozzle ID in the cell for the head.

* The number of heads differs depending on the mounter model.