M20_Ope_E.pdf - 第406页
Chapter 14 Intelligent Feeder 14-6 ⑦ The [Ready to Install the Program window] a ppears, so click <Inst all> button to start installation. ⑧ When installation is complete, the [Install Shield Wizard Complete] windo…
Chapter 14 Intelligent Feeder
14-5
14-1-3 Installing the Software Programs
This section explains how to install the intelligent feeder related software programs (i.e. server
software, barcode input software, barcode print software) to a PC.
Action:
① Display the contents of the recovery CD-ROM (supplied with the mounter) using
Windows Explorer etc.
② Open the “Intelligent” folder on the CD-ROM and double-click “Setup.exe” to start the
installer.
③ The following language selection window appears, so select the desired language and
then click <Next> button.
④ Intelligent Tool Setup window appears, so check the contents and then click <Next>
button.
⑤ [Choose Destination Location] window appears. If you want to install the software in a
folder other than the default folder, specify the desired folder. (Default folder is
“C:¥Program Files¥Intelligent”.) After the folder is specified, click <Next> button.
⑥ The Setup Type window appears, so select the desired setup method.
→To install all the software programs, select [Complete] and click <Next> button.
→To install only the necessary software programs, select “Custom” and click <Next>
button. The Select Components window appears, so check the checkboxes for the software
programs to be installed, and then click <Next> button.
Chapter 14 Intelligent Feeder
14-6
⑦ The [Ready to Install the Program window] appears, so click <Install> button to start
installation.
⑧ When installation is complete, the [Install Shield Wizard Complete] window appears, so
click <Finish> button to finish installation.
Note: To uninstall the intelligent feeder related software programs (i.e. server software, barcode
input software, barcode print software), select Control Panel > Add or Remove Programs >
Intelligent Tool > and then click [Change/Remove] button.
Component selection
window for custom
installation
Chapter 14 Intelligent Feeder
14-7
14-1-4 Connecting to a Server
Communication with the server software, client software and barcode input software is carried
out using TCP/IP. An explanation of how to make necessary communication settings is given
below.
■Setting the Server Software
From the taskbar of the server software window, select Option > Setup. (Or right-click on the
server software icon and select “Setup”.)
The following dialog box appears, so enter a port No. in [Port No.]. (The default is “1400”.
Normally, the default setting is satisfactory, so do not change it.)
■Setting the Barcode Input Software and Client Communication Software
From the taskbar of the barcode input software window, select Option > Setup Server. (Or
right-click on the barcode input software icon on the Windows task bar and select “Setup
Server”.)
For the client software, right-click on the client software icon on the Windows task bar and
select “Setup Server”.)
The Setup Server window appears, so specify the server’s IP address and port No. By default,
“127.0.0.1” is set for the IP address, and “1400” for the port No. Make sure that the same port
No. as that for the server software is set. When using the server software by only one mounter,
the default IP address and port No. can be left unchanged. When using the server software for
another mounter or PC, the IP address by which the server software is run must be specified.