M20_Ope_E.pdf - 第411页
Chapter 14 Intelligent Feeder 14-11 14-2-2 Component Barcode Extraction Method Use this function when you want to extract a part of the bar code. ■ Barcode Extraction Method Specify the item to extract. ■ Between Keyword…
Chapter 14 Intelligent Feeder
14-10
Note 1: Before registering component barcodes, make sure that InputBar is already
running.
Note 2: The scanned barcode can be entered automatically only if the “Set Comp. Name
from Barcode” checkbox is checked (the checkbox is displayed when Option >
Setup is selected).
Note 3: The feeder types displayed in the combo box are obtained from the library file
present in the location set in [Library path] in the Setup window (that appears
when Option > Setup is selected).
→When referring to a mounter’s library from the server PC, the path for the
library to be referred to can be specified. For details of setting method, refer
to “Setup”.
Note 4: The initial component count can be set in [Default Comp. Initial count] in the
Setup window (that appears when Option >Setup is selected).
Note 5: The Lot No. is extracted from the barcode affixed on a component reel.
For more details, refer to “Component Barcode Extraction Method” hereafter.
Note 6: This setting can be made only if the “Create Comp. Library when registering
Comp. Barcode” checkbox is checked (the checkbox is displayed when Option
> Setup is selected).
Note 7: The “Create Comp. Library when registering Comp. Barcode” checkbox must be
unchecked (the checkbox is displayed when Option > Setup is selected).
Chapter 14 Intelligent Feeder
14-11
14-2-2 Component Barcode Extraction Method
Use this function when you want to extract a part of the barcode.
■Barcode Extraction Method
Specify the item to extract.
■Between Keyword
Use this when there are common characters in barcodes.
■Keyword
Specify the separating characters in the barcodes for extraction.
■Position
Specify the position of the key word starting from “0”.
Example:
1111/2222/3333
When acquiring “1111” as a component barcode, select “Comp. Barcode” for [Barcode
Extraction Method], “/” for [Keyword], and “0” for [Position].
When acquiring “3333” as a component barcode, select “Lot No.” for [Barcode Extraction
Method], “/” for [Keyword], and “2” for [Position].
When acquiring “1111/2222” as a component barcode, select “Initial Count” for [Barcode
Extraction Method, “/3” for [Keyword], and “0” for [Position].
1111 / 2222 / 3333
0 1 2
1111 / 2222 / 3333
0 1 2
1111/2222 /3 333
0 1
Chapter 14 Intelligent Feeder
14-12
14-2-3 Registering to the Database
When a component barcode has been registered, the link information between the registered
component barcode and feeder barcode (ID) must be registered to the server’s database. Up to
5,000 feeder barcodes (ID) can be registered.
Action:
① Set a component in the feeder.
② Scan the "Show / Hide" barcode to display the ID registration window (InputBar).
③ Scan the feeder’s barcode.
④ Scan the component’s barcode.
⑤ Scan the "Register Database" barcode.
⑥ “OK” will be displayed if registration is completed successfully. If registration has failed,
read the displayed message, make necessary corrections, and then scan the "Register
Database" barcode again.
⑦ Scan the "Show / Hide" barcode to close the ID registration window (InputBar).
⑧ Attach the feeder to the mounter.
Now, registration to the database is complete. If you have more components and feeders to be
registered, repeat the above procedure for each component and feeder. The following
procedures can be referred to when they need to be executed.
14-2-4 Registering to the Component Library
This section explains how to register the component barcodes that have been registered to the
server’s database to the mounter’s component library. Use of this function eliminates the need
to create component data on the mounter. This function is available only for the component
codes that are registered by selecting a “Target Comp. Record” when registering a component
barcode.
Action:
① Scan the "Show / Hide" barcode to display the ID registration window (InputBar).
② Insert a floppy disk into the FDD (Note 1).
③ Select File > Create Comp. Library.
④ The following message will appear, so click <Yes>.
⑤ When registration is completed successfully, a message box will appear to inform you.
⑥ Insert the floppy disk into the mounter’s FDD (Note 2), and from the main menu, select
Tool > Backup & Restore > Individual Restore > to open the [Component Library]. Select
the component that has been registered in “Registering to the Database”, and then restore
it.
Note 1: If the component code has been created on the server PC, the FDD on the server PC
must be used. If it has been created on a mounter, the FDD on that mounter must be
used.
Note 2: The created component library file will be restored in the directory (A:¥Backup¥) of the
FDD. It is not possible to change the directory. Prepare a FDD with USB connector.