SME_Jig_User_Guide(Eng_Ver1).pdf - 第10页

在线预览 SME_Jig_User_Guide(Eng_Ver1).pdf PDF 文档。

Warning

For long distance transportation of the calibration jig, use the

packing boxes and buffing materials provided by us.

Do not attempt to modify the device without prior written approval

from Hanwha Techwin Co., Ltd., or repair it in a manner not

stated in this manual.

Hanwha Techwin Co., Ltd. is not responsible for problems caused

by machine repairs performed in a manner not mentioned in this

manual, or any modifications carried out without prior written

approval.

A system infected by a computer virus may cause the device to

malfunction, resulting in damage to the device.

We do not take responsibility for any damage to data due to an

infection by a virus. Therefore, perform a virus check periodically

to prevent data from being infected.

Preface

Thank you very much for purchasing the calibration jig for electrically driven tape feeders

(hereinafter referred to as “tape feeder”) dedicated to SM series chip mounters

manufactured by Hanwha Techwin Co., Ltd. The calibration jig is a device used to

calibrate SME tape feeders.

Since this device has a section driven by a motor and gear, as well as a power supply

module to which power is supplied, improper operation may result in user injury.

Here, users include all personnel performing operation and maintenance.

Before using

w Before using a calibration jig with an SME tape feeder, please carefully read this

manual and understand its contents well. After reading this manual, keep it nearby so

that it can be referred to when necessary.

w If a user who has not received training on an SME tape feeder calibration jig operates

this device, it may not operate properly and may cause injury.

w For safe operation and maintenance of this device, it is important that operators must

be aware of those parts that may cause safety problems.

w Please do not attempt to modify the device without prior written permission from

Hanwha Techwin Co., Ltd., or try to repair it in a manner not stated in this manual.

w Regarding training related to the operation of this device, please contact our

designated C/S company (STS) and local agent.