SME_Jig_User_Guide(Eng_Ver1).pdf - 第21页
1-1 Overvie w of Pr oduct Chapter1. Overvie w of Product The calibration jig set is a device to maintain the tap e feeder in an optimum state by calibrating the tape feeder that went out of order . Its major functi ons i…
2
User's Guide For Tape Feeder Calibration Jig
4.2. Tape Feeder Firmware Upgrade ................................................................... 4 - 13
Chapter5.Maintenance
.................................................................................................. 5 - 1
5.1. Calibration Jig Maintenance and Maintenance Items ...................................... 5 - 1
5.2. Calibration Jig .................................................................................................. 5 - 2
5.2.1. Cautions Regarding Calibration Jig Maintenance .............................. 5 - 2
5.2.2. Calibration Jig ..................................................................................... 5 - 3
5.3. Tape Feeder .................................................................................................... 5 - 4
5.3.1. Tape Feeder Inspection ..................................................................... 5 - 4
5.3.2. Lifetime Management and Overhaul .................................................. 5 - 4
5.3.3. Adjustment of X Eccentric Pin of Tape Feeder .................................. 5 - 5
5.4. Master Feeder ................................................................................................. 5 - 8
5.5. Master Tape Usage Management ................................................................... 5 - 9
5.6. Feeder Base Board Replacement ................................................................. 5 - 11
5.7. Change the Fuse ........................................................................................... 5 - 13
Chapter6.TroubleShooting
........................................................................................... 6 - 1
6.1. Problems and Measures ................................................................................. 6 - 1
6.2. Use of Grounding Cable .................................................................................. 6 - 9
Chapter7.Service Part List
............................................................................................ 7 - 1
7.1. Service Part List .............................................................................................. 7 - 1
7.1.1. Service Part List ................................................................................. 7 - 1
7.1.2. Recommended Spare Parts List ........................................................ 7 - 8
1-1
Overview of Product
Chapter1. Overview of Product
The calibration jig set is a device to maintain the tape feeder in an optimum state by
calibrating the tape feeder that went out of order.
Its major functions include the supply accuracy inspection of a tape feeder, sensor
initialization and mapping inspection.
1.1. Product Specifications
The specifications for a calibration jig and the specifications required to use the calibration
jig program are as follows:
1.1.1. Calibration Jig Specifications
Item Description
Calibration
Item
SME 8mm/0402 Feeder (Default)
SME W4P1/12mm/16mm Feeder (Possible to be calibrated
when purchasing a dedicated master tape)
It is not possible to calibrate an old large STS feeder.
Size 440(L) x 150(W) x 314(H) mm
Weight Approx. 9kg (calibration jig only)
Operating
Voltage
85~264VAC (Universal AC input/Full range)
SMPS 24V DC, 100W
Camera USB 2.0, CCD, 1/3 inch, 640 x 480
Lens 1.75x Zoom, WD 65
Light Fiducial, Coaxial Light
Stage XYZ 3 axes, ± 6.5(mm) Stroke, Micro Head
Communicati
on Method
CAN Communication
Master
Feeder
Reference feeder marked with pickup position
Master Tape Tape used for pickup position inspection and calibration, our
standard product
1-2
User's Guide For Tape Feeder Calibration Jig
1.1.2. Minimum PC Specifications for the Use of Calibration Jig
1.1.3. Product Configuration
The product configuration is as follows.
Barcode
Reader
1D barcode reader, general commercial product
Item Description
Item Description
Operating System WINDOWS 7 or above / 32bit / English Version
CPU Third generation Intel core processor or above
Memory 2GB RAM or greater
HDD 500GB or greater
Graphic Card Built-in type or above
Display Resolution 1920*1080 and higher
NO
.
PART NAME PART NO.
Option
Division
Reference
1 Calibration Jig AM03-020529A Default
2 Master Feeder AM03-020549A Default
3 SME 8mm
Master Tape
AM03-018988A Default 8mm/0402 for feeder
calibration
4 Barcode
Scanner
CD04-001012 Default
5 220V Power
Cable
EP02-000461 Default Adapter needs to be
connected for each country
6 USB-to-USB
Cable
EP02-001074 Default Connection between PC and
calibration jig
7 5 Pin-to-USB
Cable
EP02-001075 Default Connection between PC and
camera