SME_Jig_User_Guide(Eng_Ver1).pdf - 第67页
4-9 Program Installation 17. Select ’Install this driver software anyway’. 18. Click the <Close> button to finish th e [NTREX USB2CAN Converte r] installation.
4-8
User's Guide For Tape Feeder Calibration Jig
15. Select the ’Browse my computer for driver software’.
16. Click the <Browse…> button and set the path for the program installation referring to
the following path.
w Path (Path)
C:\Program Files\HANWHA TECHWIN \
FeederAccuracyJig\DeviceDriver\CAN\USB2CAN Driver
Click the <Next> button to proceed with program installation.
4-9
Program Installation
17. Select ’Install this driver software anyway’.
18. Click the <Close> button to finish the [NTREX USB2CAN Converter] installation.
4-10
User's Guide For Tape Feeder Calibration Jig
19. Check whether the [NTREX USB2CAN Converter] is recognized properly to the
’Universal Serial Bus controllers’ in the Device Manager.
20. Run the Feeder Firmware Download program saved in the USB.
21. Click the <Next> button or <Install> button until the ’VCI License Agreement’ dialog
box appears.