SME_Jig_User_Guide(Eng_Ver1).pdf - 第101页
6-9 TroubleShooting 6.2. Use of Grounding Cable When using the calibrat ion jig, it must be grounded for voltage stabilization. Prepare a grounding cable provided when purchasi ng a calibration jig. 1: Clip 2: Gro unding…
6-8
User's Guide For Tape Feeder Calibration Jig
An alarm
occurred
as the
master
tape has
been used
exceeding
the usage
count.
The usage count of the master tape
exceeded 150 times.
Initialize the usage count of the
master tape in the calibration
jig program and dispose of the
used master tape.
Problem Possible Cause Measures
6-9
TroubleShooting
6.2. Use of Grounding Cable
When using the calibration jig, it must be grounded for voltage stabilization. Prepare a
grounding cable provided when purchasing a calibration jig.
1: Clip
2: Grounding Ring
Ground the calibration jig with an object to be grounded in the following manner:
1. Connect the clip to the object to be grounded.
6-10
User's Guide For Tape Feeder Calibration Jig
2. After unscrewing the bolt fastened at the corner of the calibration jig base, insert the
bolt into the grounding ring and fasten the bolt at the corner of the calibration jig base
again. Then finish the grounding.