SME_Jig_User_Guide(Eng_Ver1).pdf - 第22页
1-2 User's Guide For Tape Fe eder Calibration Jig 1.1.2. Minimum PC Specifications for the Use of Calibration Jig 1.1.3. Product Configuration The product configuration is as follows. Barcode Reader 1D barcode reade…
1-1
Overview of Product
Chapter1. Overview of Product
The calibration jig set is a device to maintain the tape feeder in an optimum state by
calibrating the tape feeder that went out of order.
Its major functions include the supply accuracy inspection of a tape feeder, sensor
initialization and mapping inspection.
1.1. Product Specifications
The specifications for a calibration jig and the specifications required to use the calibration
jig program are as follows:
1.1.1. Calibration Jig Specifications
Item Description
Calibration
Item
SME 8mm/0402 Feeder (Default)
SME W4P1/12mm/16mm Feeder (Possible to be calibrated
when purchasing a dedicated master tape)
It is not possible to calibrate an old large STS feeder.
Size 440(L) x 150(W) x 314(H) mm
Weight Approx. 9kg (calibration jig only)
Operating
Voltage
85~264VAC (Universal AC input/Full range)
SMPS 24V DC, 100W
Camera USB 2.0, CCD, 1/3 inch, 640 x 480
Lens 1.75x Zoom, WD 65
Light Fiducial, Coaxial Light
Stage XYZ 3 axes, ± 6.5(mm) Stroke, Micro Head
Communicati
on Method
CAN Communication
Master
Feeder
Reference feeder marked with pickup position
Master Tape Tape used for pickup position inspection and calibration, our
standard product
1-2
User's Guide For Tape Feeder Calibration Jig
1.1.2. Minimum PC Specifications for the Use of Calibration Jig
1.1.3. Product Configuration
The product configuration is as follows.
Barcode
Reader
1D barcode reader, general commercial product
Item Description
Item Description
Operating System WINDOWS 7 or above / 32bit / English Version
CPU Third generation Intel core processor or above
Memory 2GB RAM or greater
HDD 500GB or greater
Graphic Card Built-in type or above
Display Resolution 1920*1080 and higher
NO
.
PART NAME PART NO.
Option
Division
Reference
1 Calibration Jig AM03-020529A Default
2 Master Feeder AM03-020549A Default
3 SME 8mm
Master Tape
AM03-018988A Default 8mm/0402 for feeder
calibration
4 Barcode
Scanner
CD04-001012 Default
5 220V Power
Cable
EP02-000461 Default Adapter needs to be
connected for each country
6 USB-to-USB
Cable
EP02-001074 Default Connection between PC and
calibration jig
7 5 Pin-to-USB
Cable
EP02-001075 Default Connection between PC and
camera
1-3
Overview of Product
Caution
When using a USB hub, install a USB hub in the left USB
3.0 port of a laptop computer. Installing a USB hub in the
right USB 2.0 port may cause defective camera operation
and defective CAN communication.
8 Grounding
Cable
AM16-001582A Default Refer to "6.2 Use of
Grounding Cable"
9 Laptop
Computer
CD02-001006 Option When using a USB hub, use
the left USB port.
w Left USB port (one): USB
3.0
w Right USB ports (two):
USB 2.0
10 Pelican Case FC29-001155 Option Carrier Type
11 SME W4P1
Master Tape
AM03-021437A Option For W4P1 feeder calibration
12 SME 12mm
Master Tape
AM03-018989A Option For 12mm/16mm feeder
calibration
NO
.
PART NAME PART NO.
Option
Division
Reference