SME_Jig_User_Guide(Eng_Ver1).pdf - 第65页
4-7 Program Installation 13. After rebooting the PC, co nn ect the USB cable of the jig to the PC and execute the W indows Device Manager to check whether the following items were re cognized properly . w [Ima ging Devic…
4-6
User's Guide For Tape Feeder Calibration Jig
10. Click the <Yes> button.
11. Click the <Install> button to proceed with program installation.
12. After finishing program installation, select the option to reboot the PC and click the
<Finish>button to reboot the PC.
4-7
Program Installation
13. After rebooting the PC, connect the USB cable of the jig to the PC and execute the
Windows Device Manager to check whether the following items were recognized
properly.
w [Imaging Devices] - [Crevis USB FA-CAMERA series]
w [Other Devices] - [NT-M-DCDMxxxx]
14. Select the [NT-M-DCDMxxxx] device with the mouse and right click the mouse to
select the ’Update Driver Software’.
4-8
User's Guide For Tape Feeder Calibration Jig
15. Select the ’Browse my computer for driver software’.
16. Click the <Browse…> button and set the path for the program installation referring to
the following path.
w Path (Path)
C:\Program Files\HANWHA TECHWIN \
FeederAccuracyJig\DeviceDriver\CAN\USB2CAN Driver
Click the <Next> button to proceed with program installation.