SME_Jig_User_Guide(Eng_Ver1).pdf - 第102页
6-10 User's Guide For Tape Fe eder Calibration Jig 2. After unscre wing the bolt fastened at the co rner of the calibration jig base, insert the bolt into the grounding ring and fasten the bolt at the corner of the …
6-9
TroubleShooting
6.2. Use of Grounding Cable
When using the calibration jig, it must be grounded for voltage stabilization. Prepare a
grounding cable provided when purchasing a calibration jig.
1: Clip
2: Grounding Ring
Ground the calibration jig with an object to be grounded in the following manner:
1. Connect the clip to the object to be grounded.
6-10
User's Guide For Tape Feeder Calibration Jig
2. After unscrewing the bolt fastened at the corner of the calibration jig base, insert the
bolt into the grounding ring and fasten the bolt at the corner of the calibration jig base
again. Then finish the grounding.
7-1
Service Part List
Chapter7. Service Part List
7.1. Service Part List
7.1.1. Service Part List