3_AVS-V2_MCT-UM-internal_EN_07-2019.pdf - 第58页
ASM AVS - U SER M ANUAL P AGE 58 OF 182 5.2.18.6 Base Data – Head Types Pl aceme nt mach ines have plac emen t hea ds, wh ich are mo unte d o n ga ntri es. Hea ds m ust be co nf igure d in o rde r to assi gn them t o a m…
ASM AVS - USER MANUAL
PAGE 57 OF 182
5.2.18.5 Base Data – Transport Lanes
Pending on the Parameter Conveyor Types, a machine can have more than one Conveyor
lane.
There are not many details about this data, it is just in order to configure a machine correctly.
Double Click the Transport Lane you want to change or mark the line and press “Edit” to open
the “Transport Lane Details” view.
Press “New” if you want to add another Transport Lane into the database.
If the machine has a double conveyor, you must determine in the measuring project, either you
measure just lane 1, or just lane 2, or both.
ASM AVS - USER MANUAL
PAGE 58 OF 182
5.2.18.6 Base Data – Head Types
Placement machines have placement heads, which are mounted on gantries.
Heads must be configured in order to assign them to a machine configuration later.
You must select the manufacturer first, to show the list of head types.
Double Click the Head Type you want to change or mark the line and press “Edit” to open the
“Head Type Details” view.
Press “New” if you want to add another Head Type into the database.
Select the manufacturer, to
show the head Types in a list
ASM AVS - USER MANUAL
PAGE 59 OF 182
1. Machine type: Machine or Screen printer.
This is a general parameter for the data which where needed for configuration and specifica-
tion (see 3
rd
area described in 4.2.2).
2. Naming: Name as known from the official documentation.
3. Select if the head can produce in Collect & Place mode (C&P) and/or in Pick & Place mode
(P&P) and edit the number of segments which can support the corresponding mode.
4. Part No.:
Add the first 8 digits from the part no. of the head. This is required to identify the head, to-
gether with the serial number in the machines configuration.
5. Head Forces:
In order to be able to evaluate placement force measurement with the AVS software, the
available force values to be measured, must be added for the head type.
For details, see " 6_AVS_V2_FMT_UM-internal_EN_MM-YYYY"
6. Head Hierarchies:
If there are different article numbers for one and the same head type, a kind of dummy head
type must be created in addition to the head types with the respective article numbers, in
which the two defined head types are entered as head hierarchy. See the following example.
Here it must be determined wheth-
er it is a head for placement ma-
chines or printer, as for the squee-
gees the same dialog is used.