3_AVS-V2_MCT-UM-internal_EN_07-2019.pdf - 第74页
ASM AVS - U SER M ANUAL P AGE 74 OF 182 5.2.18.15 Ba se Data – Stencils The ste nci ls, w hich are used f or M CT o n a pri nter does hav e S er ial num bers and po ssibl y c or- rect ion dat a. All the ste nci ls f or A…
ASM AVS - USER MANUAL
PAGE 73 OF 182
(2) Calibration Data
- Calibration certificate: is the name of the Certification document. You find it in the top right
corner of the document.
- Calibration date and next calibration: You can also find that information on the certifi-
cate.
- Calibration institute: (normal text field, default=KCB)
Once you save the standard data, the buttons in the menue group Calibration gets activated.
Now you can load the certificate (pdf-file) into the database.
Later in a project, the certificate can also be allocated to the whole report.
(3) Reference Machine
In case that the glass plate is a MasterBoard, relevant data for a Reference Machine must
be add. It is the information about a Coordinates Measurement Machine (CMM), which is
used to measure the reference Data of a Master Board.
The data in the purple colored area should not be edit.
Use the buttons in the menu area to load a reference machine to the board, which has
been add to the database like described in 5.2.19 Base Data - Capability of measuring
equipment.
(4) Reference Data
In case that the glass plate is a MasterBoard, the reference data measured by the refer-
ence machine must be load to the database.
Therefore, use the buttons in the menu area to read out the data from the text-file, that
comes from the reference machine.
The data in the blue colored area were automatically filled.
NOTICE
Menu area 4 is only active if the measuring plate is a "MasterBoard".
However, the button for naming a disk to the MasterBoard has been hidden.
Because a MasterBoard can only be defined and created on the central computer (server).
The data comes then via the base data import.
ASM AVS - USER MANUAL
PAGE 74 OF 182
5.2.18.15 Base Data – Stencils
The stencils, which are used for MCT on a printer does have Serial numbers and possibly cor-
rection data.
All the stencils for AVS have to be registered in the database.
Double Click the stencil you want to change or mark the line and press “Edit” to open the
“Stencil details” view.
Press “New” if you want to add another stencil into the database.
For the stencil (printer) following parameters are needed.
(1) Name: (Free name in the AVS database)
(2) Serial number: (printed on the label of the template).
Activation date: When the mask was used for the first time.
(3) Device: The stencil must be assigned to an AVS device (select from list).
ASM AVS - USER MANUAL
PAGE 75 OF 182
(4) Construction Data: A stencil may comprise a plurality of different openings (applica-
tions).
- Applications Type: Here the applications used on the stencil are described in de-
tails. First, set the checkboxes to what type it is.
Thereafter, the size of each application must be provided as a value.
- Number of Dots: for each application type used, the corresponding number of
points in X and Y direction must be specified.
(5) Reference Machine:
Stencils can be measured on a CMM system.
The relevant data for a Reference Machine must be add. It is the information about a
Coordinates Measurement Machine (CMM), which is used to measure the reference Da-
ta.
The data in the purple colored area should not be edit.
Use the buttons in the menu area to load a reference machine to the stencil, which has
been add to the database. See also “4_AVS-V2_Certification_EN_MM-YYYY”.
(6) ReferenceData: If the stencil was measured on a CMM machine, the reference data must
be load to the database.
Therefore, use the buttons in the menu area to read out the data from the text-file, that
comes from the reference machine.
The data were automatically filled.
(7) Recipes:
Here you can directly bind the template to one or more recipes with which this template
can work. As a result of this preselection later in a measurement project, after selecting a
template, only these linked recipes are offered for selection.
NOTICE
Stencil Reference Data
The so-called. "Reference Data" contains the offsets of each item based on the nominal values, in relation
to the global reference marks.
These values are used in the ASM AVS software, as a table for correcting the measurement results, so as to
reduce the influence of the stencil quality on the individual measurement.
The use / non-use of the correction data, has no effect on the MCT results.
Because the MCT verified the repeatability of 20 printings.
The correction data are only to improve the results of the individual measurement.