3_AVS-V2_MCT-UM-internal_EN_07-2019.pdf - 第60页

ASM AVS - U SER M ANUAL P AGE 60 OF 182 Spec ial fe atur e P & P and TWI N h ead: Due to par tially i ncom patibl e c hang es, new arti cle numb ers becam e nec ess ary f or t he P&P mod ules . P&P mo dule TH…

ASM AVS - USER MANUAL

PAGE 59 OF 182

1. Machine type: Machine or Screen printer.

This is a general parameter for the data which where needed for configuration and specifica-

tion (see 3

area described in 4.2.2).

2. Naming: Name as known from the official documentation.

3. Select if the head can produce in Collect & Place mode (C&P) and/or in Pick & Place mode

(P&P) and edit the number of segments which can support the corresponding mode.

4. Part No.:

Add the first 8 digits from the part no. of the head. This is required to identify the head, to-

gether with the serial number in the machines configuration.

5. Head Forces:

In order to be able to evaluate placement force measurement with the AVS software, the

available force values to be measured, must be added for the head type.

For details, see " 6_AVS_V2_FMT_UM-internal_EN_MM-YYYY"

6. Head Hierarchies:

If there are different article numbers for one and the same head type, a kind of dummy head

type must be created in addition to the head types with the respective article numbers, in

which the two defined head types are entered as head hierarchy. See the following example.

Here it must be determined wheth-

er it is a head for placement ma-

chines or printer, as for the squee-

gees the same dialog is used.

ASM AVS - USER MANUAL

PAGE 60 OF 182

Special feature P & P and TWIN head:

Due to partially incompatible changes, new article numbers became necessary for the P&P

modules.

P&P module THK [03033628-]

P&P module THK R2 [03097485-]

In order to be able to select the two head types (article numbers) as alternatives in a ma-

chine configuration, a higher-level dummy head type must be created in such a case.

P&P Head:

A head type is created that contains no item numbers and no force values but contains en-

tries in the Head Hierarchy area. There the two above-mentioned module types are listed.

 When integrating a P&P head into a machine type configuration, the dummy, i.e. the

P&P head, must be integrated there.

 Later when creating a machine, the modules entered in the head hierarchy list are then

offered for selection for this (dummy) head type.

You can add a photo to each head type.

The buttons for loading the image to the data set is going to be visible by moving the mouse

over the image, or the empty image field.

ASM AVS - USER MANUAL

PAGE 61 OF 182

5.2.18.7 Base Data – Squeegee Types

Printers have Squeegees instead of heads, which are mounted on gantries.

The squeegee must be configured, in order to assign it to a printer configuration.

You must select the manufacturer first, to show the list of squeegee types.

Double Click the Head Type you want to change or mark the line and press “Edit” to open the

“Head Type Details” view.

Press “New” if you want to add another Squeegee Type into the database.

The data for a Printer Head (Squeegee) consists about:

1. Machine type: Machine or Screen printer.

This is a general parameter for the data which where needed for configuration and specifi-

cation (see 3

area described in 5.2.8).

Here it must be determined

whether it is a head for place-

ment machine or printer, since

the same dialog is used for

placement heads and squeegees.

Select the manufacturer, to

show the head Types in a list