4OM-1003-007.pdf - 第101页

1.3 Maintenance Spots 051 1-002 1-38 AIL01ETRP Ball Surfaces of Linear Guide Slide Block 3M19 Every 3 Months Lubrication (DAPHNE EPONEX GREASE No. 1) Apply grease with a dispense gun. * Use No. 18 (green) or No. 19 (brow…

100%1 / 409
(20) Placement Height Correction Section
1.3 Maintenance Spots
0305-001 1-37 AIL01ETRP
Fig. 4A42 Front View of Machine
1.3 Maintenance Spots
0511-002 1-38 AIL01ETRP
Ball Surfaces of Linear Guide Slide Block 3M19
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Apply grease with a dispense gun.
* Use No. 18 (green) or No. 19 (brown) nozzle.
Grease should be applied every 3 months after the initial
month.
Bearing Guide Planes 1M33
Every Month Lubrication (MOLYNOC GREASE AP1)
Apply grease with a dispense gun.
* Use No. 19 (brown) nozzle.
No.19
No.18
No.19
Fig. 4A43 Placement Height Correction Section
(21) Placement Up/Down Section
1.3 Maintenance Spots
0511-004 1-39 AIL01ETRP
Cylinder Fulcrum 1M34
Every Month Lubrication
(MOLYNOC GREASE AP1)
Inject grease from the grease nipple with a
grease gun.
* Use the U- and N-type attachments.
U-Type N-Type
Lever Surface 1M36
Every Month Lubrication
(MOLYNOC GREASE AP1)
Apply the grease by hand or using a brush.
Outer Circumference of Bearing 1M37
Every Month Lubrication
(MOLYNOC GREASE AP1)
Apply grease with a dispense gun.
* Use No. 19 (brown) nozzle.
No.19
Outer Circumference of Cam Follower 1M35
Every Month Lubrication
(MOLYNOC GREASE AP1)
Apply the grease by hand or using a brush.
Roller Rests 3M23
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 3)
Apply grease with a dispense gun.
* Use the PR-type nozzle.
Cylinder Fulcrum 3M23-1
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Apply grease with a grease gun.
* Use the SPK-3C attachment.
Grease should be applied every 3 months
after the initial month.
Cam Constraining Cylinder 1M37-1
Every Month Lubrication
(DAPHNE EPONEX GREASE No. 3)
Apply grease with a grease gun.
* Use the SPK-3C attachment.
Inject the grease (2.5 cc) to three
places. (7.5 cc in total, Grease
Gun Stroke: 0.6 cc)
Note
Fig. 4A44 Front View of Machine