4OM-1003-007.pdf - 第24页
Safe-13 AIL01E-P Safety Precautions 0412-001 Notes on Installation, T ransfer , and Maintenance z Do not install or transfer the machine on the customer side after shipment. T o ensure perfect operation of the machine, i…
Safe-12 AIL01E-P
Safety Precautions
Precautionary Items on Feeder Carriage Section during Setup
Operation
0412-001
• A tape feeder or a bulk feeder must be installed or replaced with
another one at the feeder work area safety door.
Otherwise, you or an object may come in contact with the moving feeder
carriage and a major injury or a damage will result.
• Do not open any of the feeder work area safety doors while the
lamp of the [FEEDER READY] button is ON.
If you open any of the doors forcibly with the [FEEDER READY] button ON,
the button will be damaged.
Note: Each feeder work area safety door is provided with a [Feeder Work
Area Safety Door] button inside.
Fig. 1X12 Rear View
DANGER
Feeder Work Area Safety Doors
[FEEDER READY] Buttons
Magnified View
Safe-13 AIL01E-P
Safety Precautions
0412-001
Notes on Installation, Transfer, and Maintenance
z Do not install or transfer the machine on the customer side after shipment.
To ensure perfect operation of the machine, including safety and accuracy, only our
installation service department will install the machine or transfer it to another place.
z Only the maintenance work on items described in this manual should be performed by
the customer.
Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are not described in this manual.
Otherwise, not only breakdown of the machine but also personal injury may result.
Safe-14 AIL01E-P
Safety Precautions
0412-001
Notes on Maintenance
WARNING
Only qualified personnel should perform the maintenance work
carefully for the machine in compliance with the specified
instructions.
Before the maintenance work, be sure to turn off the power
breaker and the air source and lock them with padlocks.
Power Breaker: Set the power breaker to the "OFF" side and
lock it with a padlock.
Air Source : Stop the air supply and set the main valve to
the "EXH." side. After that, be sure to lock it
with a padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Touch the internal devices carefully. Otherwise, electric shock
can result from direct contact with live conductors.