4OM-1003-007.pdf - 第141页
0305-001 1-75 AIL01ETRP 1.4 Maintenance Method (13) After the aging is completed, the following tab sheet appears. Fig. 4A85-6 (14) When the [ENABLE] button on the operation panel is pressed in two seconds after the [ON]…
0305-001 1-74 AIL01ETRP
1.4 Maintenance Method
(11) Unlock the [EMERGENCY STOP] switch and press the [RESET]
button.
Press the [POWER ON] button to power the machine.
Press the [ALL] button (entitled "ZERO"). In two seconds, press
the [ENABLE] button on the operation panel.
(12) Press the [Next] button. The following sheet appears.
Fig. 4A85-5
Press the [F1] and [F2] buttons (entitled "FEEDER READY").
When the [ENABLE] button on the operation panel is pressed in
two seconds after the [ON] button (entitled "MOVE"), the aging
operation of the feeder carriage section starts.
0305-001 1-75 AIL01ETRP
1.4 Maintenance Method
(13) After the aging is completed, the following tab sheet appears.
Fig. 4A85-6
(14) When the [ENABLE] button on the operation panel is pressed in
two seconds after the [ON] button (entitled "MOVE"), the following
sheet appears.
Fig. 4A85-7
0305-001 1-76 AIL01ETRP
1.4 Maintenance Method
(15) Press the [EMERGENCY STOP] switch.
Open the F2 and central doors.
Clean the linear scale on the F2 side with a cotton swab soaked in
alcohol (absolute ethanol).
After the cleaning, close the F2 and central doors.
Never use any organic compounds other than alcohol.
(16) Unlock the [EMERGENCY STOP] switch and press the [RESET]
button.
Press the [POWER ON] button to power the machine.
Press the [ALL] button (entitled "ZERO"). In two seconds, press
the [ENABLE] button on the operation panel.
Press the [Next] button. The following sheet appears.
Fig. 4A85-8
(17) Press the [F1] and [F2] buttons (entitled "FEEDER READY").
Press the [ON] button (entitled "MOVE"). In two seconds, press
the [ENABLE] button on the operation panel.
Follow the same procedure as described in Step (15) to clean the
linear scale on the F1 side.
Note