4OM-1003-007.pdf - 第362页

Recognition Error ID Recognition Error Contents, Cause, and Remedy 013921 1001 An improper parameter is specified as "Component shape". 013921 1002 "Mold Size T olerance X" is larger than "Mold S…

100%1 / 409
Recognition Error ID Recognition Error Contents, Cause, and Remedy
0138200000 Unavailable fiducial mark code was set.
0138200001 "Mark Size D2" is too big, compared with "D1".
0138200002 "Mark Size D3" is too big, compared with "D1".
0138200003 "Mark Size D2" is too big, comapred with"D3".
0138200004 "Window Size" is smaller than "Mark Size".
0138200005 "Mark Size D2" is not set.
0138200006 "Mark Size D3" is not set.
0138300001 Error in "P.C.B Recognition Mark Data Mark Size D1, D2 or D3" Data.
0138300003 Error in "P.C.B Recognition Mark Data Window Size" Data.
(Cause) Wrong parameters are set for the P.E.C. recognition function.
(Remedy) Refer to "Section 2 Pattern Program" in "Vol. 3" for details and set correct
parameters.
4.3 Recognition Error IDs and Remedial Procedures
0511-002 2-173 AIL01ETRP
Recognition Error ID Recognition Error Contents, Cause, and Remedy
0139211001 An improper parameter is specified as "Component shape".
0139211002 "Mold Size Tolerance X" is larger than "Mold Size X".
0139211003 "Mold Size Tolerance Y" is larger than "Mold Size Y".
0139211004 "Outward Length Tolerances" are larger than "Outward Length".
0139211005 A front reverse side judging cannot be carried out by this component size or the
lighting pattern.
0139212001 The total of "Corner 1 Dim X" and "Corner 4 Dim X" is larger than "Mold Size X".
0139212002 The total of "Corner 1 Dim Y" and "Corner 2 Dim Y" is larger than "Mold Size Y".
0139212003 The total of "Corner 2 Dim X" and "Corner 3 Dim X" is larger than "Mold Size X".
0139212004 The total of "Corner 3 Dim Y" and "Corner 4 Dim Y" is larger than "Mold Size Y".
0139212005 "Electrode Size" is larger than half of "Mold Size X".
0139212006 # of Linear Edges is improper.
0139213001 "# of Types" (lead data) is improper.
0139213002 "# of Groups" (lead data) is improper.
0139213003 The total of "# of Leads" (lead data) is too small.
0139213004 "No Detection" is set in all "Insp Condtn" text boxes.
(Cause) Wrong parameters are set.
(Remedy) Set correct parameters.
4.3 Recognition Error IDs and Remedial Procedures
0511-002 2-174 AIL01ETRP
Recognition Error ID Recognition Error Contents, Cause, and Remedy
0139213005 "Lead Type No." in "Lead Group 1" is improper.
0139213006 "Lead Type No." in "Lead Group 2" is improper.
0139213007 "Lead Type No." in "Lead Group 3" is improper.
0139213008 "Lead Type No." in "Lead Group 4" is improper
0139213009 "Lead Type No." in "Lead Group 5" is improper.
0139213010 "Lead Type No." in "Lead Group 6" is improper.
0139213011 "Lead Type No." in "Lead Group 7" is improper.
0139213012 "Lead Type No." in "Lead Group 8" is improper.
0139213013 "Lead Pitch" in "Lead Group 1" is smaller than "Lead Width".
0139213014 "Lead Pitch" in "Lead Group 2" is smaller than "Lead Width".
0139213015 "Lead Pitch" in "Lead Group 3" is smaller than "Lead Width".
0139213016 "Lead Pitch" in "Lead Group 4" is smaller than "Lead Width".
0139213017 "Lead Pitch" in "Lead Group 5" is smaller than "Lead Width".
0139213018 "Lead Pitch" in "Lead Group 6" is smaller than "Lead Width".
0139213019 "Lead Pitch" in "Lead Group 7" is smaller than "Lead Width".
0139213020 "Lead Pitch" in "Lead Group 8" is smaller than "Lead Width".
(Cause) Wrong parameters are set.
(Remedy) Set correct parameters.
0511-002 2-175 AIL01ETRP
4.3 Recognition Error IDs and Remedial Procedures