4OM-1003-007.pdf - 第181页

1.2.2 List of Check Messages T able 4B1 Check Code Display Section A Display Section B 010101 Emergency Stop T urn on the [POWER ON] button. 010201 Air Pressure Drop Increase air pressure and press the [POWER ON] button …

100%1 / 409
*4 [OK] Button
When pressed, this button closes the "CHECK" window.
*5 Saving the check message
The check message is saved as a production message.
••
••
• Reset Procedure from "CHECK" Window
(1) Take a note of the issued check message.
Be sure to take a note of the check message. If you forget the
contents of the message, the machine cannot be reset cor-
rectly to its normal condition.
(2) Press the [OK] button. The original window resumes.
(3) Follow the contents of the check message to reset the machine
correctly to its normal condition.
0305-001 2-3
AIL01ETRP
1.2 "CHECK" Windows
Note
1.2.2 List of Check Messages
Table 4B1
Check Code Display Section A Display Section B
010101 Emergency Stop Turn on the [POWER ON] button.
010201 Air Pressure Drop Increase air pressure and press the [POWER ON] button to power
up the machine.
010301 Feeder Axis Central Close the feeder safety guard and press the [POWER ON] button
Safety Guard to power up the machine.
010401 Front Side Safety Close the safety door and press the [POWER ON] button to power
Door up the machine.
010501 Circuit Protector Circuit protector is active in the machine.
010601 Control Power
Source
030101 Operator’s Error Set operation mode to "placement".
030102 Operator’s Error Please select the available menu.
030103 Operator’s Error Input registered test ID.
030104 Operator’s Error Select correct combination of camera and lighting mode.
030105 Operator’s Error Selected available carriage.
030106 Operator’s Error Cancel the component shortage designated position stop func-
tion.
030107 Operator’s Error Recovery mode is not available while grouped component func-
tion is implemented.
030108 Operator’s Error Set "ENABLE" for destination alternate feeder.
030109 Operator’s Error Machine is in "PAUSE" mode.
03010a Operator’s Error Stop the input cnvr. (+) movement in manual mode.
03010b Operator’s Error Stop the input cnvr. (-) movement in manual mode.
03010c Operator’s Error Input correct data for manual axis operation.
03010d Operator’s Error Please input correct nozzle type data.
03010e Operator’s Error Input non-defective P.C.B. (O-NO.)
03010f Operator’s Error Wait until data communication with external device is completed.
030110 Operator’s Error P.C.B.’s were at inlet and outlet of input buffer cnvr.
030111 Operator’s Error P.C.B.’s were at inlet and outlet of input cnvr.
030112 Operator’s Error P.C.B. on Inp. Cnvr. was not able to move to its transfer action.
030113 Operator’s Error P.C.B. stop movement in manual mode.
030114 Operator’s Error Please input the test ID.
030115 Operator’s Error Please cancel "set up" mode as closing a safe cover.
030116 Operator’s Error P.C.B.’s were at inlet and outlet of output cnvr.
030117 Operator’s Error Remove the P.C.B. at the inlet of output cnvr.
030118 Operator’s Error Remove P.C.B. on the L conveyor.
030119 Operator’s Error Remove P.C.B. on the R conveyor.
03011a Operator’s Error Remove P.C.B. on the X/Y table.
03011b Operator’s Error Cannot start in CVS start protection mode.
03011c Operator’s Error Remove P.C.B. on the conveyor.
03011d Operator’s Error Cancel the start protect mode.
03011e Operator’s Error Out of range P.C.B. is exist on the conveyor.
(lot management production)
03011f Operator’s Error Not released p-out mode.
0305-001 2-4 AIL01ETRP
1.2 "CHECK" Windows
Check Code Display Section A Display Section B
030120 Operator’s Error Check the feeder. (the feeder checker)
030121 Operator’s Error Remove the P.C.B. at the inlet of input buffer cnvr.
030122 Operator’s Error Check the program name of bar code.
(the P.C.B. is on the input cnvr.)
030123 Operator’s Error It isn’t practicable with "set up" mode.
030124 Operator’s Error It isn’t practicable with "P.C.B. clamp valve" menu select.
030125 Operator’s Error Please read of barcode label on the P.C.B.
030126 Operator’s Error The fdr. was not recorded SIF data exists.
Please record by mnl. operation.
030128 Operator’s Error The fdr. was not recorded SIF data exists.
Please record by mnl. operation.
03012a Operator’s Error Remove the P.C.B. at the input cnvr.
03012b Operator’s Error Cannot start by external start protection.
03012c Operator’s Error Please change enable mode into disable mode.
(serial out mode)
03012d Operator’s Error Remove the P.C.B. at the input cnvr.
(the P.C.B. not enable B.B.R. info.)
03012e Operator’s Error Cannot start by the unit P.C.B. B.B.R. mode (conveyor).
03012f Operator’s Error Remove the P.C.B. at middle position of input buffer cnvr.
030130 Operator’s Error Cannot start by external start protection. (R1)
030131 Operator’s Error Cannot start by external start protection. (R2)
030132 Operator’s Error Cannot start by Machine is already in "running" mode.
030133 Operator’s Error Enable SW is busy status.
030134 Operator’s Error Cannot start by Machine is already in "running" unit.
030135 Operator’s Error Cannot start by Machine is not in "STOP" mode.
030136 Operator’s Error Cannot start by Machine is not in "STOP" or "PAUSE" mode.
030137 Operator’s Error Remove the P.C.B. at inside the L1 cnvr.
030138 Operator’s Error Remove the P.C.B. at outside the L1 cnvr.
030139 Operator’s Error Remove the P.C.B. at inside the L2 cnvr.
03013a Operator’s Error Remove the P.C.B. at outside the L2 cnvr.
03013b Operator’s Error Remove the P.C.B. at inside the R1 cnvr.
03013c Operator’s Error Remove the P.C.B. at outside the R1 cnvr.
03013d Operator’s Error Remove the P.C.B. at inside the R2 cnvr.
03013e Operator’s Error Remove the P.C.B. at outside the R2 cnvr.
03013f Operator’s Error Use nozzles are insufficient.
Please cancel a bypass or set a nozzle.
030140 Operator’s Error Press [EMER STOP] switch and open the F-axis safety door and
clean the linear encoder scale-tape.
030141 Operator’s Error Press [EMER STOP] switch and open the F-axis safety door and
refresh the grease.
0511-002 2-5 AIL01ETRP
1.2 "CHECK" Windows