4OM-1003-007.pdf - 第284页

051 1-002 2-91 AIL01ETRP 3.3 Error IDs and Remedial Procedures (15 L2 Conveyor) Error ID Item Description 150601 L2 Conveyor Communication The controller can not run. 150602 L2 Conveyor Communication Controller interior …

100%1 / 409
0511-001 2-90-1 AIL01ETRP
Error ID Item Description
140601 P.C.B. LOCATE LEVER THE CONTROLLER CAN NOT RUN.
COMMUNICATION
140602 P.C.B. LOCATE LEVER CONTROLLER INTERIOR IS OUT OF ORDER.
COMMUNICATION
140603 P.C.B. LOCATE LEVER CONTROLLER IN COMMUNICATION ERROR CONDITION.
COMMUNICATION
140604 P.C.B. LOCATE LEVER CONTROLLER INCOMPLETE RESULTING IN AN OVERTIME
COMMUNICATION ALARM.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0511-002 2-91 AIL01ETRP
3.3 Error IDs and Remedial Procedures
(15 L2 Conveyor)
Error ID Item Description
150601 L2 Conveyor Communication The controller can not run.
150602 L2 Conveyor Communication Controller interior is out of order.
150603 L2 Conveyor Communication Controller in communication error condition.
150604 L2 Conveyor Communication Controller incomplete resulting in an overtime alarm.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
150701 L2 Conveyor Overtime The L2 Conveyor was not completely sent.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
0511-002 2-92 AIL01ETRP
3.3 Error IDs and Remedial Procedures
(16 R2 Conveyor)
Error ID Item Description
160601 R2 Conveyor Communication The controller can not run.
160602 R2 Conveyor Communication Controller interior is out of order.
160603 R2 Conveyor Communication Controller in communication error condition.
160604 R2 Conveyor Communication Controller incomplete resulting in an overtime alarm.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
160701 R2 Conveyor Overtime The R2 Conveyor was not completely sent.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.