4OM-1003-007.pdf - 第79页

(6) Cutter Section Component Drop Prevention Cover Fig. 4A15 T op View of Machine 1.3 Maintenance Spots 0409-002 1-16 AIL01ETRP Pull out. Guide Section Guide Section Rail Section Component Drop Prevention Cover 1D9 Daily…

Fig. 4A14-1 Front View of Machine

1.3 Maintenance Spots

0305-001 1-15 AIL01ETRP

Component Receiving Box 1D8

Daily Cleaning

Clean with a vacuum cleaner.

(6) Cutter Section Component Drop Prevention Cover

Fig. 4A15 Top View of Machine

1.3 Maintenance Spots

0409-002 1-16 AIL01ETRP

Pull out.

Guide Section

Rail Section

Component Drop Prevention Cover 1D9

Daily Cleaning

When components are scattered over the

cover, follow the steps below to remove them.

1. Set the timing angle of the rotary turret to

approx. 200 degrees and turn off the power

supply before cleaning work.

2. Remove three hexagon socket head bolts

(M4) and one knurled screw and pull the

cover toward the rear side of the machine to

detach.

3. Clean the cover with a vacuum cleaner, etc.

4. Attach the cover to the machine such that

the rail section of the cover is correctly

inserted into the guide section of the machine.

5. Attach the knurled screw first and then the

three hexagon socket head bolts (M4).

Hexagon Socket Head Bolt (M4)

Knurled Screw

(7) X/Y Table Section

1.3 Maintenance Spots

0305-001 1-17 AIL01ETRP

Fig. 4A16