4OM-1003-007.pdf - 第70页
Nozzle for Dispense Gun DG10KIT T able 4A7 Standard Shape Part No. Remarks No.14 1 0 1 2 630 062 2591 (Color: Olive) No.18 1 0 0 1 630 062 2607 (Color: Green) No.19 0 1 1 2 630 062 2621 (Color: Brown) No.20 1 0 1 2 630 0…
<Contents of Kit>
Table 4A6
Part Name Q’ty
Dispense Gun (Main Body) for 10 cc 1
Syringe 20
Piston 20
End Cap 20
Syringe Cap 20
Usage
(6-1) Set the selector switch to "1" in normal cases.
Note: When the switch is set to "2", grease will be pushed out
excessively.
Be sure to set the switch to "R" before storing the gun (keeping it
unused).
(6-2) Before the charge knob is pushed to dispense the grease, con-
firm that the charge rod is inserted with its toothed section facing
downward.
(6-3) Check the amount of grease before it is supplied
(6-4) Push the charge knob slightly forward before the grease is sup-
plied.
Refer to the attached instruction manual for the detailed infor-
mation on how to use the dispense gun.
1.2 Preparation for Maintenance
0305-001 1-6 AIL01ETRP
Note
Nozzle for Dispense Gun DG10KIT
Table 4A7
Standard Shape Part No. Remarks
No.14 1 0 1 2 630 062 2591
(Color:
Olive)
No.18 1 0 0 1 630 062 2607
(Color:
Green)
No.19 0 1 1 2 630 062 2621
(Color:
Brown)
No.20 1 0 1 2 630 062 2614
(Color:
Pink)
HL2 Type 0 1 0 1 630 105 4445
RR Type 0 1 0 1 630 110 5307
Grease and Number of Required Nozzles
For DAPHNE
EPONEX
GREASE No. 1
For NEW
MOLYNOC
GREASE No. 1
Total
Frequency
in Use
For DAPHNE
EPONEX
GREASE No. 3
1.2 Preparation for Maintenance
0305-001 1-7 AIL01ETRP
Maker: Sanei Tech
Inside Diameter: φ1.6
Tapered Nozzle
#5114TT-B
Maker: Sanei Tech
Inside Diameter: φ0.84
Tapered Nozzle
#5118TT-B
Maker: Nipro
Inside Diameter: φ0.79
Length: 65 mm
Flattened End
Maker: Sanei Tech
Inside Diameter: φ0.58
Tapered Nozzle
#5120TT-B
Maker: HTI
Maker: HTI
1.3 Maintenance Spots
1.3.1 General View
Refer to "1.3.2" and after for details.
Fig. 4A5 Top View of Machine
1.3 Maintenance Spots
0412-003 1-8 AIL01ETRP
• Before performing maintenance work, turn off the
power and air sources and lock the power breaker
using the padlock.
• Designate a person who can have charge of the
padlock key.
• The cover of the machine must be detached for the
maintenance work.
After the maintenance work, be sure to attach the
cover.
(7) X/Y Table Section
(20) Placement Height
Correction Section
(22) Tape Feed Unit Section
(18) Pick-Up Height
Correction Section
(13) Feeder Carriage
Section
(2) Vacuum System
(3) Dust Collector and
Waste Tape Box
(5) Intermediate Base
(26) Filters and
Fans in Each
Section
(17) P.C.B. Transfer Section
(27) L/R Conveyor
Sections
(8) Light Source Device for
Component Recognition
(28) Exhaust Cleaner
WARNING