4OM-1003-007.pdf - 第393页

4.3.6 Component Recognition Lighting Lamp Burnout Errors AA BB C DDDDD Detail Code Secondary Error Classification (0) Primary Error Classification (0) Classification (13) of Recognition Functions T able 4B19 Recognition …

100%1 / 409
0511-002 2-204 AIL01ETRP
Recognition Error ID Recognition Error Contents, Cause, and Remedy
1005012001 Specified Number of Dots Not Found during Camera Angle Teaching Operation
(Cause 1) The jig is not correctly set.
(Cause 2) A foreign substance adheres to the jig.
(Remedy 1) Set the jig correctly.
(Remedy 2) Wipe the jig surface with a soft cloth.
4.3 Recognition Error IDs and Remedial Procedures
4.3.6 Component Recognition Lighting Lamp Burnout Errors
AA BB C DDDDD
Detail Code
Secondary Error Classification (0)
Primary Error Classification (0)
Classification (13) of Recognition Functions
Table 4B19
Recognition Error ID Recognition Error Contents, Cause, and Remedy
1300000000 The lamp for back lighting has blown in the component recognition lighting unit.
1300000001 The lamp for Front Lighting 1 (Ring 1) has blown in the component recognition light-
ing unit.
1300000002 The lamp for Front Lighting 2 (Coax) has blown in the component recognition lighting
unit.
1300000003 The lamp for Front Lighting 3 (Ring 2) has blown in the component recognition light-
ing unit.
(Cause 1) The lamp of the component recognition lighting device was burnt out.
(Remedy 1) Replace the lamp with a new one.
After the replacement, perform the teaching operation required for com
ponent recognition.
0511-002 2-205 AIL01ETRP
4.3 Recognition Error IDs and Remedial Procedures
4.3.7 Lighting Control Board-to-Board Communication Errors
AA BB C DDDDD
Detail Code
Secondary Error Classification (0)
Primary Error Classification (0)
Classification (14) of Recognition Functions
When an error ID other than the described ones is issued, con-
tact our service personnel for some advice.
Table 4B20
Recognition Error ID Recognition Error Contents, Cause, and Remedy
1400000000 Other Errors in Communication between Lighting Control Boards
1400000001 An error occurred during data transfer between recognition and lighting control boards.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Contact our service personnel for details.
0511-002 2-206 AIL01ETRP
4.3 Recognition Error IDs and Remedial Procedures
Note