4OM-1003-007.pdf - 第47页

Safe-36 AIL01E-P Safety Precautions No. Alert Labels and Description *14 Description z Keep your hands away from the cutter section. Otherwise, an injury may not be avoided. *15 Description z When a door is opened or clo…

100%1 / 409
Safe-35 AIL01E-P
Safety Precautions
Table 1X12
No. Alert Labels and Description
*11
Description
z Do not touch any part of these sections. Otherwise, heavy load will turn the handle
abruptly, causing an injury.
*12
Description
z Do not bring any metal of high magnetizability close to this. Otherwise, such metal
will easily be magnetized and attracted, causing an injury to the operator and/or a
mechanical breakdown.
z Do not bring any magnetizable material close to this.
*13
Description
z Practice grounding before power connection.
z Be sure to connect a ground wire correctly to avoid electric shock.
Imperfect grounding will cause an electric shock.
0502-002
CAUTION
Hold the wheel handle
firmly.
Otherwise, heavy load will turn
the handle abruptly, causing an injury.
WARNING
High Leakage Current!
Earth Connection Essential
before Connecting Supply
Safe-36 AIL01E-P
Safety Precautions
No. Alert Labels and Description
*14
Description
z Keep your hands away from the cutter section.
Otherwise, an injury may not be avoided.
*15
Description
z When a door is opened or closed, be sure to hold the grip firmly and slowly move
the door up or down.
Otherwise, your hand may be trapped in the door, causing an injury.
*16
Description
z Pay attention to the moving mechanisms. Otherwise, part of your body may be
trapped in the moving mechanisms, causing an injury.
*17
Description
z Pay attention to the moving mechanisms. Otherwise, part of your body may be
trapped in the moving mechanisms, causing an injury.
0502-002
Table 1X13
Safe-37 AIL01E-P
Safety Precautions
Table 1X14
No. Alert Labels and Description
*19
Description
z Secure the component drop prevention cover by tightening the screws of the bolt
holders. Otherwise, the cover will collide with the X/Y table.
*20
Description
z Secure the component drop prevention cover by tightening the screws of the guides.
Otherwise, the cover will collide with the feeder carriages and the X/Y table.
*21
Description
z Insert the component drop prevention cover securely into the guides. Otherwise, the
cover will collide with the X/Y table.
*22
Description
z Secure the component drop prevention cover by tightening the screws of the bolt
holders. Otherwise, the cover will collide with the X/Y table.
0502-002