4OM-1003-007.pdf - 第266页
Error ID Item Description 0c1 106 Head Origin Return Solenoid not connected. 0c1 107 Head Origin Return Power line warning. 0c1 108 Head Origin Return Power line error . 0c1 109 Head Origin Return Driver temperature warn…
Error ID Item Description
0c1001 Head Alarm(Angle Correct) CAM position.
0c1002 Head Alarm(Angle Correct) Origin Return Action.
0c1003 Head Alarm(Angle Correct) Motor Out of Control
0c1004 Head Alarm(Angle Correct) Current Overload.
0c1005 Head Alarm(Angle Correct) Motor not connected.
0c1006 Head Alarm(Angle Correct) Solenoid not connected.
0c1007 Head Alarm(Angle Correct) Power line warning.
0c1008 Head Alarm(Angle Correct) Power line error.
0c1009 Head Alarm(Angle Correct) Driver temperature warning.
0c1010 Head Alarm(Angle Correct) Driver temperature error.
0c1011 Head Alarm(Angle Correct) EEPROM error.
0c1012 Head Alarm(Angle Correct) Sensor error.
0c1013 Head Alarm(Angle Correct) Cam position self-check warning.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
0c1101 Head Origin Return CAM position.
0c1102 Head Origin Return Origin Return Action.
0c1103 Head Origin Return Motor Out of Control
0c1104 Head Origin Return Current Overload.
0c1105 Head Origin Return Motor not connected.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0305-001 2-76 AIL01ETRP
Error ID Item Description
0c1106 Head Origin Return Solenoid not connected.
0c1107 Head Origin Return Power line warning.
0c1108 Head Origin Return Power line error.
0c1109 Head Origin Return Driver temperature warning.
0c1110 Head Origin Return Driver temperature error.
0c1111 Head Origin Return EEPROM error.
0c1112 Head Origin Return Sensor error.
0c1113 Head Origin Return Origin Return action time over.
0c1114 Head Origin Return Not fined Origin position.(no alarm condition)
0c1115 Head Origin Return Head communication error.
.
0c1116 Head Origin Return Cam position self-check warning.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0511-002 2-77 AIL01ETRP
0511-002 2-78 AIL01ETRP
3.3 Error IDs and Remedial Procedures
(0d Camera X)
Error ID Item Description
0d0101 Camera-X Axis Origin Output signal from the pulse motor driver was not detected.
(Cause 1) This error occurs when the optical beam of the sensor is always kept in the “E/NR”
or the “E/R” condition during zeroing operation on all axes. (E/NR: Light Emitted
and Not Received, E/R: Light Emitted and Received)
(Remedy 1) Press the [RETURN] button to cancel the error display and check if the optical
beam is always kept in the “E/NR” or the “E/R” condition due to dirt on the sensor
or because the sensor is defective.
Cover the optical beam of the sensor with a piece of paper and check if the
beam of light can be shielded or received.
0d0102 Camera-X Axis Origin Origin sensor (slit) was not detected. ; BPH7 E/R
0d0103 Camera-X Axis Origin Origin sensor (slide) was not detected. ; BPH1 E/R
0d0104 Camera-X Axis Origin Feedback value is indefinite.
0d0105 Camera-X Axis Origin The camera-x is not at origin.
0d0106 Camera-X Axis Origin The camera-x was not completely zero during the set time.
0d0201 Camera-X Axis Timing Task has not been completed unable to continue.
0d0301 Camera-X Axis Data The driver data was detected outside of the possible range.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.