4OM-1003-007.pdf - 第19页
Safe-8 AIL01E-P Safety Precautions General Precautions (Feeder Carriage Section) • If a person or an object comes in contact with the feeder carriage, a major injury or damage will result. The feeder carriages are driven…
Safe-7 AIL01E-P
Safety Precautions
0412-001
Notes on Machine Operations (continued)
When the green lamp of the light tower is ON or flickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
CAUTION
In case of a disaster of any kind, earthquake, storm, flood, fire, or
lightning, immediately stop the machine and turn off the power
supply.
CAUTION
Do not use any unspecified feeders.
When the machine stops due to a component pickup error, be sure to
remove the mispicked component from the feeder and start the
automatic operation.
Safe-8 AIL01E-P
Safety Precautions
General Precautions (Feeder Carriage Section)
• If a person or an object comes in contact with the feeder carriage,
a major injury or damage will result.
The feeder carriages are driven by strong motors and move right and left at
high speed.
Keep you or any object away from the moving areas during automatic, setup,
maintenance operations, etc.
Fig. 1X7 Rear View
Fig. 1X8
DANGER
Moving Direction
Moving Direction
Feeder
Carriage
#2
Feeder
Carriage
#1
0502-002
Safe-9 AIL01E-P
Safety Precautions
General Precautions (Feeder Carriage Section)
• Before working at the rear side of the machine, be sure to turn on
the "LOCK" lamp.
When you operate the powered machine or perform the maintenance work at
the rear side of the machine, press the [PNL CHANGE] button on the rear
operation panel to turn on the "LOCK" lamp (green). Otherwise, the machine
can also be operated from the front side, exposing you to danger.
Fig. 1X9 Rear Operation Panel
DANGER
LOCK
START
POWER
ON
STOP
ENABLE
PNL
CHANGE
"LOCK" Lamp
[PNL CHANGE] Button
0412-001