4OM-1003-007.pdf - 第66页

(1) Grease and Oil • DAPHNE EPONEX GREASE No. 1 • DAPHNE EPONEX GREASE No. 3 • MOL YNOC GREASE AP1 • SYNTHESO HT220 or KLUBERSYNTH GH6-220 Equivalent T ypes of Lubricants • DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN CO.,…

100%1 / 409
1.2 Preparation for Maintenance
1.2.1 Preparation for Cleaning
Prepare the following items for cleaning.
• Brush
Use a brush whose bristles do not come off if possible.
• Cotton Swab
Use a normal cotton swab on the market.
• Rag
Use a rag which does not produce as less waste thread as possible.
Otherwise, the machine will break down due to the remaining waste
thread.
A clean rag is also required, depending on the spots to be cleaned.
• Oiled Rag
Use an oiled rag which does not produce as less waste thread as
possible. Otherwise, the machine will break down due to the remain-
ing waste thread.
Note: Do not apply too much oil to the rag. The oil should not be
mixed with another type.
• Air Gun
Do not use the air gun for any other places than the specified ones.
If dirt and dust are dispersed, they adhere to various sensors, caus-
ing the machine to break down.
• Vacuum Cleaner
Note: If the suction hole of the vacuum cleaner is changed to a
smaller one, some spots can be cleaned more easily.
• Cleaning Paper
Use the standard accessory part.
• Lens Cleaning Cloth
Use the standard accessory part.
1.2.2 Preparation for Lubrication
Prepare the specified grease, oil, and items for lubrication.
• Specified Grease and Oil
Refer to "(1) Grease and Oil" for details.
Before lubrication, wipe off the old grease and oil.
• Specified Items for Lubrication
Refer to "(2) Brush", "(3) Vinyl Gloves", "(4) Grease Applicator", "(5)
Hand Grease Gun "KH120" ", and "(6) Dispense Gun "DG10KIT" ".
1.2 Preparation for Maintenance
0305-001 1-2 AIL01ETRP
(1) Grease and Oil
• DAPHNE EPONEX GREASE No. 1
• DAPHNE EPONEX GREASE No. 3
• MOLYNOC GREASE AP1
• SYNTHESO HT220 or KLUBERSYNTH GH6-220
Equivalent Types of Lubricants
• DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN CO.,
LTD.) or its equivalent Table 4A1
Grease Names Makers
Alvania Grease No. 1 SHELL OIL
Multinoc Grease 1 Nippon Oil Corporation
Lisonix Grease No. 1 JAPAN ENERGY
Dynamax No. 1 COSMO OIL LUBRICANTS
Lithtan 1 ESSO OIL
MP Grease 1 KYGNUS OIL
Gemico MP-1 TonenGeneral Sekiyu K.K.
Multemp PS1 KYODOH YUSHI
• DAPHNE EPONEX GREASE No. 3 (IDEMITSU KOSAN CO.,
LTD.) or its equivalent Table 4A2
Grease Names Makers
Alvania Grease No. 3 SHELL OIL
Multinoc Grease 3 Nippon Oil Corporation
Lisonix Grease No. 3 JAPAN ENERGY
Dynamax No. 3 COSMO OIL LUBRICANTS
Lithtan 3 ESSO OIL
MP Grease 3 KYGNUS OIL
Gemico MP-3 GENERAL OIL
Multemp PS3 KYODOH YUSHI
• MOLYNOC GREASE AP1 (Nippon Oil Corporation) or its
equivalent
Table 4A3
Grease Names Makers
Daphne Grease M No. 1 IDEMITSU KOSAN
Jomo Lisonix M No .1 JAPAN ENERGY
Molybden Grease No. 1 COSMO OIL LUBRICANTS
Beacon Q2 ESSO OIL
Gemico Grease MD2 TonenGeneral Sekiyu K.K.
M-5 Grease No. 1 KYGNUS OIL
1.2 Preparation for Maintenance
0511-003 1-3 AIL01ETRP
• SYNTHESO HT220 (NOK KLUBER) or its equivalent
Table 4A4
Oil Names Makers
KLUBERSYNTH GH6-220 NOK KLUBER
Do not mix SYNTHESO HT220 with KLUBERSYNTH GH6-220.
(2) Brush
Use a brush whose bristles do not come off if possible.
(3) Vinyl Gloves
Use a pair of vinyl gloves to apply grease or oil by hand.
(4) Grease Applicator
Use a normal grease applicator on the market.
(5) Hand Grease Gun "KH120"
Maker: Yamada Yuki
Use the two grease guns (accessory parts) separately for two types
of greases. Be sure to select a proper gun.
Two Types of Greases: DAPHNE EPONEX GREASE No. 1
NEW MOLYNOC GREASE No. 1
Refer to the attached instruction manual for the detailed
information on how to use these greases.
Appearance
Fig. 4A3
1.2 Preparation for Maintenance
0412-002 1-4 AIL01ETRP
Note
Notice