印刷机通用说明书(中英文版） 450+.pdf - 第151页
- 151 - 3.调整 针头下降 的位 置（ Adjus t the position of needle drop ） Adjust the positio n of needle drop
- 150
-
2.做模板Mak点后进入点胶做程序
After making the template Mak point, enter the dispensing program
- 151
-
3.调整针头下降的位置（Adjust the position of needle drop）
Adjust the position of needle drop
- 152
-
4.做点胶程序是加点，加线，加圆，然后再试点看点的位置对不对来设置点胶头到相机的补偿，最后再看点胶量来设置延时
和点胶喷气设备
To do a dispensing program, you need to add points, lines, circles, and then test the position of the point of view to
set the compensation from the dispensing head to the camera. Finally, you need to check the amount of glue to set
the delay and dispensing jet equipment