印刷机通用说明书(中英文版） 450+.pdf - 第74页
- 74 - 项目有。 : Production setting. Clicking t his but ton will display t he interface of pix 3-18. The se ttable ite ms in the interface are as f ollowing: 生产设置：有很多选项，勾选后执行，反之不执行； Production sett ing: Many options can be …
- 73
-
Pix 4-5(open project)
3． ：数据录入按钮。该按钮在两种状态下使用。
: Data input. Use this button under the following two conditions:
一．打开工程或新建工程时
该状态下单击该按钮出现图 3-7 所示的界面。该界面下的设置请参照第三章。
Open project or create new project.
The interface in the pix 3-7 will display under the above conditions. Please refer
to the chapter 3 to set this interface.
二．在生产过程中按机器外壳上的
“
Start/Stop
”
按钮后
该状态下单击该按钮出现图 3-7 界面，相关设置请参考第三章。
Press the “Start/Stop” button on the shell of the printer during the production.
The interface in the pix 3-7 will display under the above condition. Please refer to the
chapter 3 to set this interface.
4. ：生产设置按钮。点击该按钮后出现图 3-18 界面。在该界面下可设置的
- 74
-
项目有。
: Production setting. Clicking this button will display the interface of pix 3-18.
The settable items in the interface are as following:
生产设置：有很多选项，勾选后执行，反之不执行；
Production setting: Many options can be selected. Start execution after the selection
and vise versa.
平台补偿：输入平台补偿值；
Platform compensation: input the platform compensation value.
刮刀
Y
向补偿：当机器对位精度达到要求时，印出来的锡膏是偏的，这时就要根据偏移
的数值输入相应的补偿。前后刮刀均不一样。
The Y direction compensation of the scraper: when the matching accuracy meets the
requirement and the printing solder paste is offset, the operator needs input the
corresponding compensation value according to the offset data. It is different for front and
back scraper
其他设置：同样有很多选项，勾选后执行，反之不执行；
Other settings: Many options can be selected. Start execution after the selection and
vise versa.
5
． ：归零按钮。单击该按钮后按软件提示操作机器将执行归零动作。如图
3-
2
，
3-3
，
3-4
所示。
: Return to zero. The print will do the movement of returning to zero
after clicking the button. See Pix 3-2，3-3，3-4.
6
． ：过板功能。点击该按钮后出现图
4 - 6
界面。机器只执行过板功能，相当
于过板机使用。
: Pass board. The interface in the pix 4-6 will display by click this
button. The printer will pass the board and it can be used as a
equipment which can pass board.
- 75
-
图 4-6（过板界面）
Pix (board pass interface)