印刷机通用说明书(中英文版） 450+.pdf - 第5页
- 5 Automatic t inning f unction 8.4 自动拖钢网 功能 · ···· ······ ······ ··· ····131 Automatic d ragging ste el mesh function 8.5 钢网堵孔检 测功能 开启 ·· ······ ······ ··· ····133 Steel m esh blo ckage detectio n 8.6 光源酒精称 重 ·· ······…
- 4
3.1 开机前检查························· 34
Check before turning on the equipment
3.2 开始生产前准备······················· 35
Preparation before production
3.3试生产····························59
Trial production
3.4生产流程图··························63
Production flow
第四章 操作系统说明······················· 65
Chapter 4 Introduction of the operation system
4.1 系统启动·························· 65
System start-up
4.2 主窗口组成························· 65
Main window components
第五章报警处置·························· 91
Chapter 5 Alarm disposal
5.1 机器报警项目·························91
Equipment alarm items
5.2 机器报警项目解释以及处置方法·················91
Explanation of equipment alarm items and the solutions
第六章2D锡膏检测操作说明·····················101
Chapter 6 Operating introduction of 2D solder paste test
第七章新增部分功能介绍说明···················· 111
Chapter 7 Introduction of the new functions
7.1 名词解释···························111
Noun explanation
7.2 软件操作步骤·························114
Software operation steps
第八章选配项介绍说明························120
Chapter 8 introduction of optional items
8.1 压力检测···························120
Pressure detection
8.2锡膏余量检测························· 124
Solder paste margin detection
8.3自动加锡功能························· 129
- 5
Automatic tinning function
8.4自动拖钢网功能························131
Automatic dragging steel mesh function
8.5钢网堵孔检测功能开启·····················133
Steel mesh blockage detection
8.6光源酒精称重·························135
Light source alcohol weighing
8.7指纹模块···························138
Fingerprint module
8.8串联印刷机功能························141
Serial printing machine function
8.9 BadMark功能·························143
BadMark function
8.10 相机读条码·························145
Camera reads barcode
8.11点胶功能·························· 149
Glue dispensing function
8.12 SPI,MES共享设置······················156
SPI,MES shared settings
8.13入口条码枪························· 169
Entrance barcode gun
8.14电路图··························· 171
Circuit diagram
- 6
前言
Preface
本说明书，是为了安全使用本产品的说明书。
This manual is for the safe use of this product.
在使用本产品前，务请阅读本说明书，在充分理解运行、检查、维修的基础上进行使用。
Before using this product, please read this manual and use it based on a full understanding
of operation, inspection, and maintenance.
若进行与本说明书上所载操作不同的操作，则恐会导致重大事故。
If different operations are carried out from those described in this manual, it may lead to
major accidents.
本说明书中，记载有如下标注。这些标注，是专门用来确保安全的注意事项。在操作过程中，
应在充分理解的基础上进行作业。
In this manual, the following annotations are recorded. These annotations are specifically
designed to ensure safety precautions. During the operation process, homework should be
carried out on the basis of full understanding.
警告 WARNING
随意变更设定，会导致机械错误动作而引发重伤或者重大灾害事故。
Changing settings arbitrarily can lead to mechanical errors and cause
serious injuries or major disasters.
操作者及维修负责人在进行本机械的操作或维修前，请仔细阅读本说明
书。
Before operating or repairing this machine, operators and maintenance
personnel should carefully read this manual.
请将本说明书保管在机械附近，以便在任何时候都能轻易进行参照。
Please keep this manual near the machinery for easy reference at all
times.
在完全理解本说明书之前，请勿进行机械的运转或维修。
Do not operate or repair the machinery until you fully understand this
manual.
弄丢或者损坏本说明书时，应尽快向我公司或者我公司代理店订购。
If you lose or damage this manual, you should purchase it from our
company or our agency as soon as possible.
转让本产品时，务必连同本说明书一起转让给新的所有者。
When transferring this product, it is necessary to transfer it to the new
owner along with this manual.