88242361-04-01 Vol 1 DEK TQ TECHNICAL REFERENCE (1).pdfPDFA.pdf - 第11页
2 SAFETY FEATURES 2.2 SAFETY NOTICES TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 11 2.2.2 Warning Notices Warning notices draw the attention of operators/maintainers to a potentially hazardous situation which, if not avoid…
2 SAFETY FEATURES
2.2 SAFETY NOTICES
10 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
2.2 SAFETY NOTICES
Safety notices in the form of PROHIBITION, WARNING, CAUTION and MANDATORY labels are
placed on the printing machine and notices are posted throughout the associated documentation to
alert the operator/maintainer to possible hazards which may cause physical injury or equipment
damage.
The label illustrated below, fitted to the printer, signifies that the user should refer to the relevant
section of the Technical Reference Manual before attempting to carry out work on the equipment.
2.2.1 Prohibition Notices
Prohibition notices draw the attention of operators/maintainers to prohibiting behaviour likely to
cause a risk to health or safety. The following table displays the prohibition labels affixed to
machine and displayed in the machine documentation.
Symbol Definition
PROHIBITION
STRONG MAGNETIC FIELD. A STRONG MAGNETIC FIELD EXISTS IN THE
VICINITY OF THE LINEAR MOTORS THAT MAY ACT UPON FERROUS OB-
JECTS WHOSE MOVEMENTS COULD LEAD TO PERSONAL INJURY AND/
OR DAMAGE TO THE MACHINE.
PROHIBITION
STRONG MAGNETIC FIELD. A STRONG MAGNETIC FIELD EXISTS IN THE
VICINITY OF THE LINEAR MOTORS THAT REPRESENT A SERIOUS HAZ-
ARD TO PEOPLE FITTED WITH METALLIC IMPLANTS.
PROHIBITION
ELECTROMAGNETIC FIELD. AN ELECTROMAGNETIC FIELD EXISTS
WITHIN THE MACHINE FROM THE LINEAR MOTORS. THESE MAY
PRESENT A HAZARD TO PEOPLE FITTED WITH AN IMPLANTED CARDIAC
DEVICE. THE MOTOR MANUFACTURER RECOMMENDS A SAFE DISTANCE
OF AT LEAST 400MM.
PROHIBITION
MACHINE COVERS. IN ORDER TO PROTECT PERSONNEL AND TO PRE-
VENT DAMAGE TO THE MACHINE, COVERS ARE FITTED TO THE MACHINE
FRAME. THESE PANELS MUST ONLY BE REMOVED BY SUITABLY QUALI-
FIED PERSONNEL.
2 SAFETY FEATURES
2.2 SAFETY NOTICES
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 11
2.2.2 Warning Notices
Warning notices draw the attention of operators/maintainers to a potentially hazardous situation
which, if not avoided, could result in death or serious injury. The following table displays the warn-
ing labels affixed to the printer and/or displayed in the machine documentation:
Symbol Definition
WARNING
MOVING PARTS. MOVING PARTS ARE PRESENT IN THE VICINITY OF THIS
WARNING LABEL, THESE PARTS HAVE THE POTENTIAL TO CAUSE IN-
JURY.
WARNING
BOARD CLAMPS. EXTREME CARE MUST BE EXERCISED WHEN WORKING
IN THE TOOLING AREA OF THE MACHINE TO AVOID INJURY. THE FOILS
ON THE FRONT AND REAR BOARD CLAMPS ARE VERY SHARP.
WARNING
FLAMMABLE. FLAMMABLE SUBSTANCES ARE PRESENT. KEEP AWAY
FROM HEAT, SOURCES OF IGNITION AND STATIC DISCHARGES. USE IN A
WELL VENTILATED AREA.
WARNING
LETHAL VOLTAGE. DANGEROUS VOLTAGES EXIST IN THIS EQUIPMENT.
ENSURE ALL ELECTRONIC COVERS AND MAIN MACHINE COVERS ARE
FITTED BEFORE OPERATING THIS EQUIPMENT.
WARNING
HOT SURFACES. THE SURFACE OF THIS COMPONENT OR SURROUNDING
AREA MAY BECOME HOT DURING PROLONGED OPERATION. CARE TO BE
TAKEN WHEN WORKING IN THE VICINITY OF THIS COMPONENT.
))
((
WARNING
STRONG MAGNET FIELD. A STRONG MAGNETIC FIELD EXISTS IN THE VI-
CINITY OF THE LINEAR MOTORS. THIS MAY PRESENT A HAZARD TO PER-
SONNEL OR EQUIPMENT.
WARNING
COMPRESSED AIR. COMPRESSED AIR SHOULD NEVER IMPINGE UPON
THE BODY. PORTS, PIPES, ETC MUST NEVER BE BLOCKED BY HAND. BE-
FORE CONNECTING OR DISCONNECTING ANY PNEUMATIC COPMPON-
ENTS, ENSURE THE COMPRESSED AIR SUPPLY HAS BEEN DISSIPATED
AND DISCONNECTED FROM THE MACHINE.
WARNING
E STOP CIRCUIT. THE E STOP CIRCUIT FITTED TO THE MACHINE ONLY
ISOLATES THE DC SUPPLIES TO THE MOTORS. LETHAL VOLTAGES ARE
STILL PRESENT WITHIN THE MACHINE AFTER THE E STOP HAS BEEN AC-
TIVATED.
WARNING
HARMFUL SUBSTANCES. CLEANING WIPES AND CLEANING SOLUTIONS
MAY CONTAIN SUBSTANCES HAZARDOUS TO HEALTH. WHEN USING
CLEANING WIPES AND CLEANING SOLUTIONS THE MANUFACTURERS’
SAFETY DATA SHEETS MUST BE STRICTLY ADHERED TO.
2 SAFETY FEATURES
2.2 SAFETY NOTICES
12 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
Symbol Definition
WARNING
MACHINE LIFTING. TO PREVENT SERIOUS INJURY TO PERSONNEL, DUR-
ING LIFTING AND TRANSPORTATION OPERATIONS, ENSURE THE MA-
CHINE IS LIFTED AND TRANSPORTED IN ACCORDANCE WITH INSTRUC-
TIONS DETAILED IN THIS SECTION.
WARNING
SOLVENT SPRAY. THE UNDERSTENCIL CLEANER SPRAYS A FINE JET OF
SOLVENT SOLUTION ON TO THE CLEANER. APPROVED PROTECTIVE
CLOTHING SHOULD BE WORN.
WARNING
HEAVY OBJECT. EXTREME CAUTION SHOULD BE EXERCISED WHEN
MANUALLY HANDLING HEAVY ITEMS INTO OR OUT OF THE MACHINE.