88242361-04-01 Vol 1 DEK TQ TECHNICAL REFERENCE (1).pdfPDFA.pdf - 第81页
6 MACHINE CONTROL 6.3 CONTROLLER POWER MODULE (CPM) TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 81 FL 1 FL 2 SI O-L IN K SL 1 SL 2 SL 3 SL4 SL 5 SL6 SL 7 SL 8 PW D 4 3 2 1 1 Address of this module (must be set to 0) 3 RJ11…
6 MACHINE CONTROL
6.3 CONTROLLER POWER MODULE (CPM)
80 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
6.3 CONTROLLER POWER MODULE (CPM)
The CPM connects to the NuMotion control card in the machine controller using 2 fibre optic links.
The information coming from the machine controller is translated and the control signal directed to
either; one of the EPM’s or one of the ESIO’s. Feedback from sensors and positional readers are
fed back to the NuMotion control card via the fibre optic link.
4
3
2
1
1 Controller Power Module (CPM) 3 Extended Power Module (EPM) 2
2 Extended Power Module (EPM) 1 4 Extended Power Module (EPM) 3
NOTE
EPM 1 is only fitted if auto coplanarity or TCM option is fitted.
6 MACHINE CONTROL
6.3 CONTROLLER POWER MODULE (CPM)
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 81
FL1
FL2
SIO-LINK
SL1
SL2
SL3 SL4
SL5 SL6
SL7
SL8
PWD
4
3
2
1
1 Address of this module
(must be set to 0)
3 RJ11 Connectors to ESIO mod-
ules (SIOLink)
2 Fibre Optic links to the NuMotion
Card in the Machine Controller
(PC)
4 Power Supply 24V US
6.3.1 Front Connectors
24V Power Supply Unit
1
Pin No Signal Pin No Signal
1 24V 2 0V
SIOLink
1
6
Pin No Signal Pin No Signal
1 Not Used 4 XCVR--
2 GND 5 Not Used
3 XCVR+ 6 GND
6 MACHINE CONTROL
6.3 CONTROLLER POWER MODULE (CPM)
82 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
6.3.1.1 SIOLinks
SIOLInk Designation
SL1 ESIO-1 SL5 ESIO-5
SL2 ESIO-2 SL6 ESIO-6
SL3 ESIO-3 SL7 Spare
SL4 ESIO-4 SL8 Spare
6.3.2 Rear Connectors
The rear of the CPM connects to the EPM’s using two ribbon cables to each EPM.
CPM
Not Used
EPM 1
EPM 2
EPM 3
View on Rear of CPM and EPM’s