88242361-04-01 Vol 1 DEK TQ TECHNICAL REFERENCE (1).pdfPDFA.pdf - 第32页

4 MACHINE OVERVIEW 4.1 MODULE OVERVIEWS 32 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 4.1.2 Power Supply Module The power supply module fulfils the following functions: ● Transform and rectify the mains voltage supply to …

100%1 / 194
4 MACHINE OVERVIEW
4.1 MODULE OVERVIEWS
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 31
4 MACHINE OVERVIEW
4.1 MODULE OVERVIEWS
This chapter describes the function and the purpose of each of the machine modules, their location
within the machine and the relationship and interaction between modules, if applicable. For detailed
information regarding each module refer to the relevant module chapter in this manual.
4.1.1 Human Machine Interface (HMI) Module
The HMI module enables communication and interaction between the user and the machine.
11
10
9
8
7
6
5
4
3
2
1
1 Light Tower 7 ESD Earthing Points
2 Jog Button (Right) 8 Mains Isolator Switch
3 USB Connectors 9 Emergency Stop (E Stop) Button
4 System Button 10 Internal Light Button
5 Monitor 11 Jog Button (Left)
6 Keyboard
4 MACHINE OVERVIEW
4.1 MODULE OVERVIEWS
32 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
4.1.2 Power Supply Module
The power supply module fulfils the following functions:
●
Transform and rectify the mains voltage supply to the voltages required by the electrical sys-
tems throughout the machine.
●
Electrical safety - achieved by the use of emergency stop safety circuits (E Stop button and
cover safety switches). When an E Stop is activated, power is removed from selected areas of
the machine.
4
3
2
1
1 System Button 3 Mains Isolator Switch
2 Power Supply Enclosure 4 E Stop Button
4 MACHINE OVERVIEW
4.1 MODULE OVERVIEWS
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 33
4.1.3 Machine Control Module
The machine control system is the central hub controlling machine motion. This consists of:
●
Machine Controller (PC)
●
Extended Power Module (EPM)
●
Controller Power Module (CPM)
●
Encoder Serial Input or Output (ESIO) Modules
Machine control is an interface between the software and:
●
Motors
●
Sensors
●
Switches and Solenoids
1 ESIOs (Upper Frame) 3 ESIOs (Lower Frame)
2 Control System
(PC, CPM and EPMs)