88242361-04-01 Vol 1 DEK TQ TECHNICAL REFERENCE (1).pdfPDFA.pdf - 第12页
2 SAFETY FEATURES 2.2 SAFETY NOTICES 12 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 Symbol Definition WARNING MACHINE LIFTING. TO PREVENT SERIOUS INJURY TO PERSONNEL, DUR- ING LIFTING AND TRANSPORTATION OPERATIONS, ENSURE …
2 SAFETY FEATURES
2.2 SAFETY NOTICES
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 11
2.2.2 Warning Notices
Warning notices draw the attention of operators/maintainers to a potentially hazardous situation
which, if not avoided, could result in death or serious injury. The following table displays the warn-
ing labels affixed to the printer and/or displayed in the machine documentation:
Symbol Definition
WARNING
MOVING PARTS. MOVING PARTS ARE PRESENT IN THE VICINITY OF THIS
WARNING LABEL, THESE PARTS HAVE THE POTENTIAL TO CAUSE IN-
JURY.
WARNING
BOARD CLAMPS. EXTREME CARE MUST BE EXERCISED WHEN WORKING
IN THE TOOLING AREA OF THE MACHINE TO AVOID INJURY. THE FOILS
ON THE FRONT AND REAR BOARD CLAMPS ARE VERY SHARP.
WARNING
FLAMMABLE. FLAMMABLE SUBSTANCES ARE PRESENT. KEEP AWAY
FROM HEAT, SOURCES OF IGNITION AND STATIC DISCHARGES. USE IN A
WELL VENTILATED AREA.
WARNING
LETHAL VOLTAGE. DANGEROUS VOLTAGES EXIST IN THIS EQUIPMENT.
ENSURE ALL ELECTRONIC COVERS AND MAIN MACHINE COVERS ARE
FITTED BEFORE OPERATING THIS EQUIPMENT.
WARNING
HOT SURFACES. THE SURFACE OF THIS COMPONENT OR SURROUNDING
AREA MAY BECOME HOT DURING PROLONGED OPERATION. CARE TO BE
TAKEN WHEN WORKING IN THE VICINITY OF THIS COMPONENT.
))
((
WARNING
STRONG MAGNET FIELD. A STRONG MAGNETIC FIELD EXISTS IN THE VI-
CINITY OF THE LINEAR MOTORS. THIS MAY PRESENT A HAZARD TO PER-
SONNEL OR EQUIPMENT.
WARNING
COMPRESSED AIR. COMPRESSED AIR SHOULD NEVER IMPINGE UPON
THE BODY. PORTS, PIPES, ETC MUST NEVER BE BLOCKED BY HAND. BE-
FORE CONNECTING OR DISCONNECTING ANY PNEUMATIC COPMPON-
ENTS, ENSURE THE COMPRESSED AIR SUPPLY HAS BEEN DISSIPATED
AND DISCONNECTED FROM THE MACHINE.
WARNING
E STOP CIRCUIT. THE E STOP CIRCUIT FITTED TO THE MACHINE ONLY
ISOLATES THE DC SUPPLIES TO THE MOTORS. LETHAL VOLTAGES ARE
STILL PRESENT WITHIN THE MACHINE AFTER THE E STOP HAS BEEN AC-
TIVATED.
WARNING
HARMFUL SUBSTANCES. CLEANING WIPES AND CLEANING SOLUTIONS
MAY CONTAIN SUBSTANCES HAZARDOUS TO HEALTH. WHEN USING
CLEANING WIPES AND CLEANING SOLUTIONS THE MANUFACTURERS’
SAFETY DATA SHEETS MUST BE STRICTLY ADHERED TO.
2 SAFETY FEATURES
2.2 SAFETY NOTICES
12 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
Symbol Definition
WARNING
MACHINE LIFTING. TO PREVENT SERIOUS INJURY TO PERSONNEL, DUR-
ING LIFTING AND TRANSPORTATION OPERATIONS, ENSURE THE MA-
CHINE IS LIFTED AND TRANSPORTED IN ACCORDANCE WITH INSTRUC-
TIONS DETAILED IN THIS SECTION.
WARNING
SOLVENT SPRAY. THE UNDERSTENCIL CLEANER SPRAYS A FINE JET OF
SOLVENT SOLUTION ON TO THE CLEANER. APPROVED PROTECTIVE
CLOTHING SHOULD BE WORN.
WARNING
HEAVY OBJECT. EXTREME CAUTION SHOULD BE EXERCISED WHEN
MANUALLY HANDLING HEAVY ITEMS INTO OR OUT OF THE MACHINE.
2 SAFETY FEATURES
2.2 SAFETY NOTICES
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 13
2.2.3 Caution Notices
Caution notices draw the attention of operators/maintainers to a potentially hazardous situation
which, if not avoided may result in minor or moderate injury. The following table displays the cau-
tion labels affixed to the printer and/or displayed in the machine documentation:
Symbol Definition
CAUTION
RECOMMENDED SOLVENTS. ANY SOLVENTS USED MUST COMPLY WITH
LOCAL ENVIRONMENTAL GUIDELINES. ASM RECOMMEND USING
SOLVENTS THAT ARE ENVIRONMENTALLY FRIENDLY, IE CFC FREE AND
WATER BASED. SOLVENTS USED MUST HAVE FAST EVAPORATION
RATES AND FLASHPOINT SPECIFICATIONS GREATER THAN 39°C.
CAUTION
SOLDER PASTE AND SOLVENTS. WHEN USING OR HANDLING ANY
SOLDER PASTE OR SOLVENT FORMULATION THE MANUFACTURERS’
SAFETY DATA SHEETS MUST BE STRICTLY ADHERED TO.
CAUTION
SOLVENT SOLUTION. DO NOT MIX SOLVENT SOLUTIONS. FLUSH THE
SOLVENT TANK THOROUGHLY WHEN CHANGING TO A DIFFERENT
SOLVENT SOLUTION.
CAUTION
ANTI-STATIC HANDLING. STANDARD PRECAUTIONS MUST BE ADHERED
TO WHEN HANDLING ELECTRONIC CARDS AND CONFIGURING AND IN-
SERTING INTO THE ENCLOSURES.
CAUTION
RADIATION. RISK OF INJURY TO THE EYES DUE TO LASER LIGHT BEING
PRESENT IN THE VICINITY OF THE LABEL. DO NOT LOOK AT THE LIGHT
SOURCE OR REFLECTIONS FROM A SURFACE.
CAUTION
EQUIPMENT SERVICING. THE LASER DOES NOT CONTAIN USER SER-
VICEABLE PARTS. OPENING THE UNIT COULD CAUSE MIS-ALIGNMENT
OF THE LASER, THIS MAY MAKE THE EQUIPMENT DANGEROUS TO OPER-
ATE.
CAUTION
LASER CONTROLS AND ADJUSTMENTS. USE OF CONTROLS OR ADJUST-
MENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPE-
CIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.