88242361-04-01 Vol 1 DEK TQ TECHNICAL REFERENCE (1).pdfPDFA.pdf - 第138页
8 SQUEEGEE MODULE 8.4 CALIBRATIONS 138 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
8 SQUEEGEE MODULE
8.4 CALIBRATIONS
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 137
33. Carry out calibration as detailed in Steps 21 to 24.
Once the rear squeegee load cell calibration is complete, both the Front and Rear Squeegee
Load Cell Calibration screens are displayed.
34. Select Save And Exit.
35. Open the front cover.
36. Remove the calibration jig from the rear squeegee mount.
37. Remove the pressure plate from the tooling table.
38. Refit the tooling, stencil and squeegees, if required.
39. Close the front cover.
40. Press the System button.
41. Select Confirm.
42. Select Confirm.
43. Select Exit.
8 SQUEEGEE MODULE
8.4 CALIBRATIONS
138 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
9 PASTE DISPENSER SYSTEM
9.1 OVERVIEW
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 139
9 PASTE DISPENSER SYSTEM
9.1 OVERVIEW
1
2
4
5
15
17
14
8
13
16
3
7
6
11
12
9
10
18
12
Paste Dispenser Cartridge Overview - View On Front
1 Paste Cartridge Mounting Plate 10 Anti-Drip Nozzle
2 Paste Cartridge Carrier 11 500g Paste Cartridge
3 Electrical and Pneumatic
Connectors
12 Paste Cartridge Cap
4 Paste Cartridge Cover 13 Paste Dispenser Drip Tray
5 Paste Cartridge Support 14 Paste Dispense Pressure Gauge
6 Pneumatic Tube Coil Guide 15 Paste Dispense Regulator
7 Pneumatic Quick Release Fitting 16 Paste Low Level Sensor
8 Linear Bearings and Guide 17 Cartridge Paste Regulator
Assembly
9 1Kg Paste Cartridge 18 X Axis Linear Drive