88242361-04-01 Vol 1 DEK TQ TECHNICAL REFERENCE (1).pdfPDFA.pdf - 第159页
9 PASTE DISPENSER SYSTEM 9.4 REPLACEMENT PROCEDURES TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 159 19. Lift (3) the jar dispenser assembly (1) off of the retaining dowels (2) on the mounting then remove (4) the assembly f…
9 PASTE DISPENSER SYSTEM
9.4 REPLACEMENT PROCEDURES
158 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
17. Manually move the jar dispenser into the centre of the printer, and lower the paste dispenser
to expose two M5 socket cap-head retaining screws.
18. Using a 4mm Allen key loosen the two M5 captive retaining screws.
9 PASTE DISPENSER SYSTEM
9.4 REPLACEMENT PROCEDURES
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 159
19. Lift (3) the jar dispenser assembly (1) off of the retaining dowels (2) on the mounting then
remove (4) the assembly from the machine.
4
2
1
3
2
1
20. Using a 4mm Allen key remove the two M5 securing screws (2) to release the jar paste regu-
lator assembly (1).
3
2
1
21. Lift the jar paste regulator assembly (1) up and remove the retaining clip (3) from the aperture
in the machine side plate.
22. Carefully store the jar dispenser and jar paste regulator assembly (1) to prevent damage.
9 PASTE DISPENSER SYSTEM
9.4 REPLACEMENT PROCEDURES
160 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
23. Place the cartridge paste regulator assembly (1) in position on the machine.
3
2
1
24. Feed the low paste sensor cable (3) through the cartridge bracket guard.
25. Connect the cartridge paste low level sensor's electrical connector (4).
26. Locate the retaining clip (3) of the cartridge paste regulator assembly (1) in the aperture in the
machines side plate.
3
2
1
27. Using a 4mm Allen key secure the cartridge paste regulator assembly in place with two M5
socket cap-head screws (2).