88242361-04-01 Vol 1 DEK TQ TECHNICAL REFERENCE (1).pdfPDFA.pdf - 第74页
6 MACHINE CONTROL 6.2 MACHINE CONTROLLER 74 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 6.2.3 Connectors 1 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 16 17 18 1 USB (Type 2) 10 DisplayPort (Not Used) 2 USB (Type 3.0) 11 COM 1 Port…
6 MACHINE CONTROL
6.2 MACHINE CONTROLLER
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 73
6.2 MACHINE CONTROLLER
The machine controller is a computer using the Windows 10 IoT Enterprise operating system to run
the DEK software which controls all the printer functions.
6.2.1 Motherboard
The motherboard houses the Central Processing Unit (CPU) which is an Intel® Celeron® Dual
Core processor G3900 2.8GHz and provides the master control of all machine functions.
The main features of the motherboard are:
External
●
SVGA, DVI-D and DisplayPort Video Outputs
●
12 USB Ports (4 x Type 2 and 8 x Type 3.0)
●
2 Ethernet 10/100Base-T output via an RJ45 connectors
●
RS232 Interface (COM1) Connector
●
6 Pin Mini Keyboard Connector
●
Line Out Connector
●
Microphone In Connector
Internal (Not Shown)
●
6 SATA HDD Controllers
●
4 PCI Express Bus Interface
●
4 DDR4 DIMM Sockets (RAM)
●
Lithium battery backup
6.2.2 CMOS Settings
The CMOS settings are password protected to prevent any settings being changed.
It is highly unlikely that the CMOS settings could be responsible for machine controller issues how-
ever, if the settings are strongly suspected, contact the local CSG office.
NOTE
If a USB drive is plugged in during power-up, the DEK software does not start as the printer tries to
boot from the USB drive. All USB drives should be removed prior to the machine being shut down.
6 MACHINE CONTROL
6.2 MACHINE CONTROLLER
74 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
6.2.3 Connectors
1 2 3
4
56
7
89101112
13
14151617
18
1 USB (Type 2) 10 DisplayPort (Not Used)
2 USB (Type 3.0) 11 COM 1 Port (Not Used)
3 Firewire Card 12 SVGA Connector
4 NuMotion Card 13 USB (Type 2)
5 LAN Host Comms Connectors 14 Keyboard Connector (Not Used)
6 Line Out (Not Used) 15 Earth Stud
7 Microphone In (Not Used) 16 Power Connector (24V dc)
8 USB (Type 3.0) 17 Power Switch
9 DVI Connector (Not Used) 18 Reset Button
6.2.3.1 Power Connector
2 Way Mini Fit Molex
1
Pin No Signal Pin No Signal
1 24V dc 2 0V
6 MACHINE CONTROL
6.2 MACHINE CONTROLLER
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 75
6.2.3.2 LAN Host Comms
RJ45
1
8
Pin No Signal Pin No Signal
1 +ve Transmit 5 N/C
2 -ve Transmit 6 -ve Receive
3 +ve Receive 7 N/C
4 N/C 8 N/C
6.2.3.3 SVGA Connector
15 Way Condensed D Type Socket
10
1
5
11
Pin No Signal Pin No Signal
1 Analogue Red 9 N/C
2 Analogue Green 10 V Sync GND
3 Analogue Blue 11 ID 0
4 ID 2 12 ID 1
5 H Sync GND 13 H Sync
6 Red GND 14 V Sync
7 Green GND 15 ID 3
8 Blue GND