88242361-04-01 Vol 1 DEK TQ TECHNICAL REFERENCE (1).pdfPDFA.pdf - 第160页
9 PASTE DISPENSER SYSTEM 9.4 REPLACEMENT PROCEDURES 160 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 23. Place the cartridge paste regulator assembly (1) in position on the machine. 3 2 1 24. Feed the low paste sensor cable…
9 PASTE DISPENSER SYSTEM
9.4 REPLACEMENT PROCEDURES
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 159
19. Lift (3) the jar dispenser assembly (1) off of the retaining dowels (2) on the mounting then
remove (4) the assembly from the machine.
4
2
1
3
2
1
20. Using a 4mm Allen key remove the two M5 securing screws (2) to release the jar paste regu-
lator assembly (1).
3
2
1
21. Lift the jar paste regulator assembly (1) up and remove the retaining clip (3) from the aperture
in the machine side plate.
22. Carefully store the jar dispenser and jar paste regulator assembly (1) to prevent damage.
9 PASTE DISPENSER SYSTEM
9.4 REPLACEMENT PROCEDURES
160 TECHNICAL REFERENCE MANUAL DEK TQ 04/2021
23. Place the cartridge paste regulator assembly (1) in position on the machine.
3
2
1
24. Feed the low paste sensor cable (3) through the cartridge bracket guard.
25. Connect the cartridge paste low level sensor's electrical connector (4).
26. Locate the retaining clip (3) of the cartridge paste regulator assembly (1) in the aperture in the
machines side plate.
3
2
1
27. Using a 4mm Allen key secure the cartridge paste regulator assembly in place with two M5
socket cap-head screws (2).
9 PASTE DISPENSER SYSTEM
9.4 REPLACEMENT PROCEDURES
TECHNICAL REFERENCE MANUAL DEK TQ 04/2021 161
28. Fit the cartridge dispenser assembly by locating (4) the cartridge dispenser assembly (1) on
the retaining dowels (2) and pushing down (3).
4
2
1
3
2
1
29. Using a 4mm Allen key secure the assembly in place by tightening the two captive M5 socket
cap-head screws.