Printer 710_810 v8 Transportation.pdf - 第100页

TRANSPORT ATION MACHINE POW ER UP S EQUENCE 34.100 Technical Reference Manual Chapter Issue 7 Oct 06 i. Using the keyboar d/mouse (s towed inside the l ower front cove r of the machine) click in th e Open box, type chkds…

100%1 / 120
TRANSPORTATION
MACHINE POWER UP SEQUENCE
Chapter Issue 7 Oct 06 Technical Reference Manual 34.99
MACHINE POWER UP SEQUENCE
Hard Disk Check 1. Connect the pneumatic supply to the connection on the rear, bottom left of
the machine, External Services section of this chapter refers.
2. Connect the mains supply to the machine.
3. Turn the Mains Isolation Switch ON.
4. Carry out the following:
Checking Hard
Disk Partition C
a. During the machine initialisation, press the System button when
prompted.
b. To close the DEK program and display the Windows desktop, select
Show Classic to display the classic menu.
c. Select Maint..
d. Select Diagnost.
e. Ensure that System is highlighted and select Select Module.
f. Select the Previous button once to highlight Terminate Control Pro-
gram.
g. Select Run Diagnost.
h. Select Start on the taskbar and select Run....
Detail Accept Reject
Check the machine hard disk for any defects caused in
transit using Chkdsk.
TRANSPORTATION
MACHINE POWER UP SEQUENCE
34.100 Technical Reference Manual Chapter Issue 7 Oct 06
i. Using the keyboard/mouse (stowed inside the lower front cover of the
machine) click in the Open box, type chkdsk c: /r /f and select OK.
j. The Chkdsk program displays the following prompt. Select Y, En te r.
Checking Hard
Disk Partition D
k. When the DOS window closes, select Start on the taskbar, select Run....
l. Click in the open box, type chkdsk d: /r /f and select OK.
TRANSPORTATION
MACHINE POWER UP SEQUENCE
Chapter Issue 7 Oct 06 Technical Reference Manual 34.101
m. The Chkdsk program displays the following prompt. Select Y, Ente r.
n. The Chkdsk program executes and checks the D drive for errors.
Checking Hard
Disk Partition E
o. When the DOS window closes, select Start on the taskbar, select Run....
p. Click in the open box, type chkdsk e: /r /f and select OK.
q. The Chkdsk program displays the following prompt. Select Y, Ent e r.
r. The Chkdsk program executes and checks the E drive for errors.