Printer 710_810 v8 Transportation.pdf - 第31页
TRANS PORTATION MAJOR RELO CATION Chapter Issue 7 Oct 06 Technical Reference Manual 34.31 7. Disconnect the IR Rec eiver Unit fr om 4SK03 on t he 4 port USB hub. 8. Remove the I R Receiv er Unit from t he machine. 9. S t…
TRANSPORTATION
MAJOR RELOCATION
34.30 Technical Reference Manual Chapter Issue 7 Oct 06
Removal of the MMI
Assembly (Sliding
Glass Cover)
If the machine is being relocated in a DEK machine crate, the MMI assembly
must be wrapped securely in bubble wrap or removed from the machine using
the following procedure:
1. Remove the following connections on the rear of the monitor:
• Monitor Power Cable (DC)
• VGA Cable
• Touchscreen Cable (USB)
2. Remove the IR receiver unit (secured with velcro) from the bracket above
the monitor.
3. Remove the touchscreen stylus from the monitor arm.
4. Remove the monitor from the monitor arm by removing the four fixing
screws.
5. Remove the monitor arm by removing the three screws that secure the
monitor arm to the machine.
6. Locate the 4 port USB hub secured to the left side of the mains isolator
switch bracket.
Monitor Fixing Screws
Monitor Fixing
Screws
Touchscreen Stylus
IR Receiver Unit
DC Connection
Touchscreen
Connection
(USB)
IR Receiver Unit Cable
VGA Connection
USB Flash Drive
TRANSPORTATION
MAJOR RELOCATION
Chapter Issue 7 Oct 06 Technical Reference Manual 34.31
7. Disconnect the IR Receiver Unit from 4SK03 on the 4 port USB hub.
8. Remove the IR Receiver Unit from the machine.
9. Stow the following cables neatly inside the machine:
• Monitor Power Cable
• VGA Cable
• Touchscreen Monitor Cable
10. Refit all the covers.
TRANSPORTATION
MAJOR RELOCATION
34.32 Technical Reference Manual Chapter Issue 7 Oct 06
Removal of the MMI
Assembly (Gull
Wing Cover)
1. Remove the following connections on the rear of the monitor:
• Monitor Power Cable (DC)
• VGA Cable
• Touchscreen Cable (USB)
2. Locate the 4 port USB hub secured to the left side of the mains isolator
switch bracket.
3. Disconnect the keyboard/mouse from 4SK03 on the 4 port USB hub.
4. Unclip the cable conduit from the three pipe clamps on the rear of the MMI
tube.
5. Remove the keyboard cable from the cable conduit.